[mrtg] Snmp request failing

[Michael Di Martino]

	I am having a great deal of trouble rec'ing  snmp info from my snmp enamble devices.
	 
	I can query the loacalhost no problem but when i send a request to my cisco 2600 series router
	i get a No Response Error
	 
	This is the contents of my snmpd.conf
	 more /etc/snmp/snmpd.conf
	rocommunity t3lx
	 
	And the following is my snmp commands on the cisco 2600
	logging trap notifications 
	logging facility local6 
	logging 192.168.11.28 
	snmp-server community t3lx RO 
	snmp-server location 60 Hudson, 23rd floor. 
	snmp-server contact Michael DiMartino 
	snmp-server chassis-id 60HUDSONST 
	snmp-server enable traps snmp authentication linkdown linkup coldstart warmstart 
	snmp-server enable traps tty 
	snmp-server enable traps isdn call-information 
	snmp-server enable traps config 
	snmp-server enable traps entity 
	snmp-server enable traps bgp 
	snmp-server enable traps frame-relay 
	snmp-server enable traps rtr 
	snmp-server host 192.168.11.28 t3lx
	 
	and this the result of the snmpwalk command to the cisco 2600

	snmpwalk -v 1 -c t3lx 192.168.11.1 interface 
	Timeout: No Response from 192.168.11.1 

	snmpwalk -v 1 -c t3lx 192.168.11.1 system 
	Timeout: No Response from 192.168.11.1 

	Any idea why this falling?
Regards,
Michael Di Martino
Director of MIS
The telx Group
Office: 212 480 3300  X.2022
Cell: 646 207 6603
mdm at telx.com
--------------------------
Sent from my BlackBerry Wireless Handheld

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi