[mrtg] Re: MRTG and ISA server

[William Owen]

You might want to check your SNMP service configuration.  By default, Win2k
and Win2k3 server will respond to only to hosts listed in the security tab
(localhost by default).  If you have "from these hosts" selected, you MUST
have your monitoring server listed.  Also, if you use a NetBIOS or DNS name
here, your server must be able to resolve the name.  To alleviate both of
these issues, you can use the "from any host" to test. 

-----Original Message-----
From: Garth Williams [mailto:garth.williams at acrodex.com] 
Sent: Tuesday, October 05, 2004 5:55 PM
To: rglauser at areaofficeonaging.com; mrtg at list.ee.ethz.ch
Subject: [mrtg] Re: MRTG and ISA server

http://www.loriotpro.com/Service&Support/How_to/InstallWXPAgent_EN.php

*

Neither mib walker is on a server. One is on W2K pro and the other XP. I
am not aware of any way to place an ACL on the snmp service running on a
server.

*

Is Solarwinds on another server than GetIf?
If so, then perhaps the SNMP service on the target is set to allow SNMP
access from the Getif server and not the SolarWindws service.

*

Yes the solarwinds mib walker is polling on UDP port 161 and can
successfully poll other serers.

* 

Is your SNMP poll/walk/whatever from Solarwinds on the same UDP port as
GetIf?  Or does it poll on another port?  Can you use Solarwindws to
poll another server to verify settings?

*

I am having a problem setting up MRTG on ISA server 2000. <SNIP>


--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi


--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi