[mrtg] SV: Portname on Cisco 6509

[Leif Johansson]

The description is of course set! But it's CatOS on the 6509. Does it
matter?

/Leif

-----Ursprungligt meddelande-----
Från: Bill Wichers [mailto:billw at waveform.net]
Skickat: den 17 oktober 2004 18:46
Till: Leif Johansson
Kopia: mrtg at list.ee.ethz.ch
Ämne: Re: [mrtg] Portname on Cisco 6509


> This is maybe a newbie question, but how do I get the port names from the
> Cisco Catalyst 6509? Then a I run the cfgmaker the portname field is
> unlabeled.
> I don't want to add the name manually to 300 ports... Is there a way to
> get
> it automaticly? I have tried almost every combination of switches.
>
> Best regards
> /Leif

Do you mean the *description* field comes back unlabled? On all Cisco
equipment I have tried, cfgmaker will come back with the information you
have set on the Cisco for the description of each port.

Do a:

enable
conf t
int [whatever]
description Port 1 to somewhere
ctrl-Z

Then run cfgmaker. It should see "Port 1 to somewhere" as the description
for interface "whatever".

If you don't set the description the best you'll get from the switch is
the int0/1/2:3 type of response. It can't query info that the switch
doesn't have.

     -Bill

*****************************
Waveform Technology
UNIX Systems Administrator




--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi