[mrtg] Monitoring Multiple Switches - New Wrinkle

[Tim Holmes]

Hi, well, I went through and created config files for all my switches that I am trying to monitor.  

Then I ran index maker, and checked the new MRTG webpage that was generated.  

It's interesting.  

The core switch is working perfectly - no glitches, everything labeled as it should be etc.

The next switch in line, everything is labeled correctly, but there are no graphs showing up

The next 2 switches, there are graphs that appear to be working fine, but no unit labels - the ports are correctly identified, but the name of the switch is missing

The last one, no labels or graphs. 

I suspect that the missing labels are probably due to a mis-cofiguration at the switch, I can likely find that with a little digging, the missing graphs has me stumped, any ideas?

Also, it seems that either MRTG or NTOP is really dragging my system down.  It's a P4HT box with 256 ram and 40 gig hdd running RHEL 3 WS.  I don't know if this is normal or if I goofed something up (again)

Any help that any of you can offer would be greatly appreciated.


Our switches are Foundry EdgeIron 4802 and 2402 and the core is a FastIron Edge 4802


TIM




Tim Holmes
 
IT Manager
Medina Christian Academy, Inc.
A Higher Standard...
 
Jeremiah 33:3
Jeremiah 29:11
Esther 4:14



--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi