[mrtg] Cisco Router help

[Paul Hong]

Hi All,

I am setting up MRTG to monitor my cisco router and I checked the snmp
settings.

Anyways, I have the daemon running in dos, but when I open the html page.

There is nothing showing and also I just check the html page again.

The day and time was two days ago.

Please see my cfg file below.

Any response would be greatly appreciated.

 

Thanks,

 

Paul Hong

 

RunAsDaemon: yes

Interval: 5

workdir: c:\inetpub\wwwroot\mrtg

Target[10.1.1.1_1]: 1:public at 10.1.1.1:

SetEnv[10.1.1.1_1]: MRTG_INT_IP="" MRTG_INT_DESCR="Serial0"

MaxBytes[10.1.1.1_1]: 192000

Title[10.1.1.1_1]: Traffic Analysis for 1 -- MBC-T1.mbcsystems.org

PageTop[10.1.1.1_1]: <H1>Traffic Analysis for 1 --
MBC-T1.mbcsystems.org</H1>

 <TABLE>

   <TR><TD>System:</TD>     <TD>MBC-T1.mbcsystems.org in </TD></TR>

   <TR><TD>Maintainer:</TD> <TD></TD></TR>

   <TR><TD>Description:</TD><TD>Serial0 PB CKT 23HCGM004327/PBI
1-800-463-8724 </TD></TR>

   <TR><TD>ifType:</TD>     <TD>frame-relay (32)</TD></TR>

   <TR><TD>ifName:</TD>     <TD>Se0</TD></TR>

   <TR><TD>Max Speed:</TD>  <TD>192.0 kBytes/s</TD></TR>

 </TABLE>

 

 

### Interface 2 >> Descr: 'FastEthernet0' | Name: 'Fa0' | Ip: 10.1.1.1' |
Eth: '00-07-50-ef-22-4a' ###

 

Target[10.1.1.1_2]: 2:public at 10.1.1.1:

SetEnv[10.1.1.1_2]: MRTG_INT_IP="10.1.1.1" MRTG_INT_DESCR="FastEthernet0"

MaxBytes[10.1.1.1_2]: 12500000

Title[10.1.1.1_2]: Traffic Analysis for 2 -- MBC-T1.mbcsystems.org

PageTop[10.1.1.1_2]: <H1>Traffic Analysis for 2 --
MBC-T1.mbcsystems.org</H1>

 <TABLE>

   <TR><TD>System:</TD>     <TD>MBC-T1.mbcsystems.org in </TD></TR>

   <TR><TD>Maintainer:</TD> <TD></TD></TR>

   <TR><TD>Description:</TD><TD>FastEthernet0 TO LOCAL LAN </TD></TR>

   <TR><TD>ifType:</TD>     <TD>ethernetCsmacd (6)</TD></TR>

   <TR><TD>ifName:</TD>     <TD>Fa0</TD></TR>

   <TR><TD>Max Speed:</TD>  <TD>12.5 MBytes/s</TD></TR>

   <TR><TD>Ip:</TD>         <TD>10.1.1.1 ()</TD></TR>

 </TABLE>

 

 

### Interface 3 >> Descr: 'Null0' | Name: 'Nu0' | Ip: '' | Eth: '' ###

### The following interface is commented out because:

### * it is a cisco Null0 interface

# 

# Target[10.1.1.1_3]: 3:public at 10.1.1.1:

# SetEnv[10.1.1.1_3]: MRTG_INT_IP="" MRTG_INT_DESCR="Null0"

# MaxBytes[10.1.1.1_3]: 536870911

# Title[10.1.1.1_3]: Traffic Analysis for 3 -- MBC-T1.mbcsystems.org

# PageTop[10.1.1.1_3]: <H1>Traffic Analysis for 3 --
MBC-T1.mbcsystems.org</H1>

#  <TABLE>

#    <TR><TD>System:</TD>     <TD>MBC-T1.mbcsystems.org in </TD></TR>

#    <TR><TD>Maintainer:</TD> <TD></TD></TR>

#    <TR><TD>Description:</TD><TD>Null0  </TD></TR>

#    <TR><TD>ifType:</TD>     <TD>Other (1)</TD></TR>

#    <TR><TD>ifName:</TD>     <TD>Nu0</TD></TR>

#    <TR><TD>Max Speed:</TD>  <TD>536.9 MBytes/s</TD></TR>

#  </TABLE>

 

 

 

_______________________________________________ 
  

Paul Hong

Sr. Systems Engineer 

1809 East Dyer Road, Suite 311 

Santa Ana, CA 92705 

PHONE (949) 863-0022 EXT 207 

FAX (949) 863-0023 ATTN Paul Hong

______________________________________________ 
  
CONFIDENTIALITY NOTICE: Privileged and/or confidential information may be
contained in this message and may be subject to legal privilege. This email
and any attachments are intended only for the person or entity to which it
is addressed. If you are not the intended recipient, any dissemination,
distribution or copying is strictly prohibited. If an addressing or
transmission error has misdirected this email, please notify the author by
replying to it, and delete this email from your system and destroy any hard
copy printouts. Any views or opinions presented are solely those of the
author and do not necessarily represent those of MBC. The recipient should
check this email and any attachments for the presence of viruses. MBC
accepts no liability for any damage caused by any virus transmitted by this
email.

 




--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi