[mrtg] erx 1400 mrtg

MATIAS, Gregg M. GMMATIAS at pldt.com.ph
Tue Sep 7 02:22:57 MEST 2004

Hi to all. My company is offering DSL lines and we are receiving complaints regarding slowdown. We are using Nortel, Alcatel and Nokia as DSLAMs and ERX1400, Cisco10k and Redback SMS1 as BRAS. I am planning to use MRTG to validate the actual bandwidth utilization of those DSL subscribers with complaints. I have already researched MRTG usage for SMS and still trying out some config for erx1400. I have tried using the config maker. My problem is it seems not to get the atm interface.

### Interface 184581495 >> Descr: 'ATM1/2.13400433' | Name: 'AT1/2.13400433' | Ip: '' | Eth: '' ###
### The following interface is commented out because:
### * has a speed of 0 which makes no sense
# Target[]: 184581495:public at
# SetEnv[]: MRTG_INT_IP="" MRTG_INT_DESCR="ATM1/2.13400433"
# MaxBytes[]: 0
# Title[]: Traffic Analysis for 184581495 -- xxxIIPS01
# PageTop[]: <H1>Traffic Analysis for 184581495 -- xxxIIPS01</H1>
#  <TABLE>
#    <TR><TD>System:</TD>     <TD>MGOIIPS01 in </TD></TR>
#    <TR><TD>Maintainer:</TD> <TD></TD></TR>
#    <TR><TD>Description:</TD><TD>ATM1/2.13400433  </TD></TR>
#    <TR><TD>ifType:</TD>     <TD>ATM Sub Interface (134)</TD></TR>
#    <TR><TD>ifName:</TD>     <TD>AT1/2.13400433</TD></TR>
#    <TR><TD>Max Speed:</TD>  <TD>0.0 Bytes/s</TD></TR>
#  </TABLE>

I was hoping that i can use this, since it has the atm vpi and vci. DSL subs are unique to this information. 

My question is,  am i missing something? do i need a special mib file for this? do i need to make further configuration in the erx1400? or shall i say, what are my other options to monitor our dsl subscribers.

Thank you very much to all of you in advance.


The information in this electronic message is privileged and confidential, intended only for use of the individual or entity named as addressee and recipient. If you are not the addressee indicated in this message (or responsible for delivery of the message to such person), you may not copy, use, disseminate or deliver this message.  In such case, you should immediately delete this e-mail and notify the sender by reply e-mail. Please advise immediately if you or your employer do not consent to Internet e-mail for messages of this kind.  Opinions, conclusions and other information expressed in this message are not given, nor endorsed by and are not the responsibility of PLDT unless otherwise indicated by an authorized representative of PLDT independent of this message.

Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi

More information about the mrtg mailing list