[mrtg] Re: Help!

Alex Ames aames at tapeswitch.com
Wed Sep 22 22:30:37 MEST 2004

    To configure your 3Com SuperStack switch for SNMP, you need to 
access it via telnet or the serial console and ensure that SNMP is 
enabled. SNMP configuration is NOT available via the 3Com web interface. 
You will then  need to set the community names for each of the access 
levels (if the switch firmware supports this).
You may also need to update the switch firmware to gain access to this 


Alex A.

Abimael R. Sergio wrote:

>I am running snmp on a 3 Com Super Tack Switch 4200.
>In my computer I am runnig a cfgmaker as follow:
># ./cfgmaker --global 'WorkDir: /home/StarOfDeath'  --global 
>'Options[_]: bits,growright'  --output /home/StarOfDeath/mrtg.cfg 
>public at
>--base: Get Device Info on public at
>SNMP Error:
>no response received
>SNMPv1_Session (remote host: "" [].161)
>                  community: "public"
>                 request ID: -330282091
>                PDU bufsize: 8000 bytes
>                    timeout: 2s
>                    retries: 5
>                    backoff: 1)
> at /usr/local/mrtg-2/bin/../lib/mrtg2/SNMP_util.pm line 627
>SNMPWALK Problem for on public at
> at ./cfgmaker line 831
>WARNING: Skipping public at as no info could be retrieved
>--base: Writing /home/abimael/mrtg.cfg
>Do yo know what is wrong here?
>Please I need help urgent.

Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi

More information about the mrtg mailing list