[mrtg] MRTG and multiple interfaces

[rglauser at areaofficeonaging.com]

I am running MRTG using routers2.cgi as my front end. I have a Cisco
2650 router with 1 ethernet and 3 T1 interfaces. I can measure data on
the ethernet0/0 interface and the serial 0/0 interface. No matter what I
try I cannot get serial0/1:0 and serial0/2:0 to reply. The error that I
get is:
 
###Interface 4 >> Descr: 'T1-0/1' | Name: 'T1 0/1' | Ip: '' | Eth: '' 
###The following interface is commented out because: 
### * it is a DS1 controllers 
### * got 'Received SNMP response with error code 
### error status: noSuchName 
### index 1 (OID: 1.3.6.1.2.1.2.2.1.10.4) 
### SNMPv1_Session (remote host: "172.18.1.20" [172.18.1.20].161) 
### community: "public" 
### request ID: -1752370354 
### PDU bufsize: 8000 bytes 
### timeout: 2s 
### retries: 5 
### backoff: 1)' from interface when trying to query 
 
### Interface 5 >> Descr: 'T1-0/2' | Name: 'T1 0/2' | Ip: '' | Eth: ''
### 
### The following interface is commented out because: 
### * it is a DS1 controllers 
### * got 'Received SNMP response with error code 
### error status: noSuchName 
### index 1 (OID: 1.3.6.1.2.1.2.2.1.10.5) 
### SNMPv1_Session (remote host: "172.18.1.20" [172.18.1.20].161) 
### community: "public" 
### request ID: -1752370353 
### PDU bufsize: 8000 bytes 
### timeout: 2s 
### retries: 5 
### backoff: 1)' from interface when trying to query 
 
### Interface 6 >> Descr: 'Serial0/1:0' | Name: 'Se0/1:0' | Ip:
'172.19.2.24' | Eth: '' ### 
 
###Target[172.18.1.20_Se0_1_0]: #Se0/1:0:public at 172.18.1.20: 
###SetEnv[172.18.1.20_Se0_1_0]: MRTG_INT_IP="172.19.2.24"
###MRTG_INT_DESCR="Serial0/1:0" 
###MaxBytes[172.18.1.20_Se0_1_0]: 192000 
###Title[172.18.1.20_Se0_1_0]: #Se0/1:0 -- 2650main 
###PageTop[172.18.1.20_Se0_1_0]: <H1>#Se0/1:0 -- 2650main</H1> 
 
### Interface 7 >> Descr: 'Serial0/2:0' | Name: 'Se0/2:0' | Ip:
'172.21.2.24' | Eth: '' ### 
 
###Target[172.18.1.20_Se0_2_0]: #Se0/2:0:public at 172.18.1.20: 
###SetEnv[172.18.1.20_Se0_2_0]: MRTG_INT_IP="172.21.2.24" 
###MRTG_INT_DESCR="Serial0/2:0" 
###MaxBytes[172.18.1.20_Se0_2_0]: 192000 
###Title[172.18.1.20_Se0_2_0]: #Se0/2:0 -- 2650main 
###PageTop[172.18.1.20_Se0_2_0]: <H1>#Se0/2:0 -- 2650main</H1> 
 
Where do I begin?
--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi