[mrtg] MRTG/RRDTool migration woes

[Dan Wozniak]

I'm having difficulties setting up MRTG ver. 2.12.2 with RRDTool ver.
1.2.10-win32-perl58 on Microsoft Windows Server 2003 w/ SP1.  

If I've installed the rrdtool perl module from a depository by using
ppm, do I still need to specify it in my MRTG cfg file such as this
line? 
##########
#RRD Perl module (RRDs.pm) location
LibAdd:
D:\Intranet\mrtg-2.11.1\bin\rrdtool-1.2.10-win32-perl58\rrdtool\bindings
\perl-shared\
##########
I ask this because the RRDs.pm perl module is not included in the
rrdtool-1.2.10-win32-perl58.zip file.  In the RRDTool Integration doc is
says to include the line where the perl module is located such as
"LibAdd: c:\rrdtool\bin\lib\perl".

When I try to run MRTG w/ RRDTool I get these errors: 

##########
D:\Intranet\mrtg-2.12.2\mrtg-2.12.2\bin>perl -w mrtg
mrtg_ups_temp_probe.cfg
WARNING:
Daemonizing MRTG ...
Do Not close this window. Or MRTG will die
WARNING: can't do threshold checking for target breaker16.xxx.com_1(i)
-- No valid current data
WARNING: can't do threshold checking for target breaker16.xxx.com_1(i)
-- No valid current data
WARNING: can't do threshold checking for target breaker07.xxx.com_1(i)
-- No valid current data
WARNING: can't do threshold checking for target breaker07.xxx.com_1(i)
-- No valid current data
Terminating on signal SIGINT(2)
##########

I'm only monitoring two APC UPS's as you can see above.  

Any help is appreciated.

--Dan

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://lists.ee.ethz.ch/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://lists.ee.ethz.ch/lsg2.cgi