[mrtg] Re: mrtg produces no output
Wren, Michael
mwren at burnsmcd.com
Thu Dec 8 18:16:09 MET 2005
Make sure that /var/www/mrtg is a directory and not a file. I also
looked at some of my configs and I had a problem until I added a "/" to
the end, so it would be Workdir: /var/www/mrtg/
-----Original Message-----
From: mrtg-bounce at list.ee.ethz.ch [mailto:mrtg-bounce at list.ee.ethz.ch]
On Behalf Of Matt Kowske
Sent: Thursday, December 08, 2005 10:58 AM
To: mrtg at list.ee.ethz.ch
Subject: [mrtg] Re: mrtg produces no output
Tried that. No apparent errors:
2005-12-08 10:50:10 -- Started mrtg with config '/etc/mrtg/mrtg2.cfg'
2005-12-08 10:50:10 -- --base: Creating Lockfiles
/etc/mrtg/mrtg2.cfg_l,/etc/mrtg/mrtg2.cfg_l_12801
2005-12-08 10:50:10 -- --base: Reading Config File: /etc/mrtg/mrtg2.cfg
2005-12-08 10:50:10 -- --cfg: /etc/mrtg/mrtg2.cfg[1]: # Created by
2005-12-08 10:50:10 -- --cfg: /etc/mrtg/mrtg2.cfg[2]: #
/usr/bin/cfgmaker shadowfax.mordor.x
2005-12-08 10:50:10 -- --cfg: /etc/mrtg/mrtg2.cfg[3]:
2005-12-08 10:50:10 -- --cfg: /etc/mrtg/mrtg2.cfg[4]:
2005-12-08 10:50:10 -- --cfg: /etc/mrtg/mrtg2.cfg[5]: ### Global Config
Options
2005-12-08 10:50:10 -- --cfg: /etc/mrtg/mrtg2.cfg[6]:
2005-12-08 10:50:10 -- --cfg: /etc/mrtg/mrtg2.cfg[7]: # for UNIX
2005-12-08 10:50:10 -- --cfg: /etc/mrtg/mrtg2.cfg[8]: WorkDir:
/var/www/mrtg
2005-12-08 10:50:10 -- --cfg: /etc/mrtg/mrtg2.cfg[9]:
2005-12-08 10:50:10 -- --cfg: /etc/mrtg/mrtg2.cfg[10]: # or for NT
2005-12-08 10:50:10 -- --cfg: /etc/mrtg/mrtg2.cfg[11]: # WorkDir:
c:\mrtgdata
2005-12-08 10:50:10 -- --cfg: /etc/mrtg/mrtg2.cfg[12]:
2005-12-08 10:50:10 -- --cfg: /etc/mrtg/mrtg2.cfg[13]: ### Global
Defaults
2005-12-08 10:50:10 -- --cfg: /etc/mrtg/mrtg2.cfg[14]:
2005-12-08 10:50:10 -- --cfg: /etc/mrtg/mrtg2.cfg[15]: # to get bits
instead of bytes and graphs growing to the right
2005-12-08 10:50:10 -- --cfg: /etc/mrtg/mrtg2.cfg[16]: # Options[_]:
growright, bits
2005-12-08 10:50:10 -- --cfg: /etc/mrtg/mrtg2.cfg[17]:
2005-12-08 10:50:10 -- --cfg: /etc/mrtg/mrtg2.cfg[18]: EnableIPv6: no
2005-12-08 10:50:10 -- --cfg: /etc/mrtg/mrtg2.cfg[19]:
2005-12-08 10:50:10 -- --cfg: /etc/mrtg/mrtg2.cfg[20]:
######################################################################
2005-12-08 10:50:10 -- --cfg: /etc/mrtg/mrtg2.cfg[21]: # System:
shadowfax
2005-12-08 10:50:10 -- --cfg: /etc/mrtg/mrtg2.cfg[22]: # Description:
Linux shadowfax 2.6.9-22.0.1.ELsmp #1 SMP Thu Oct 27 13:14:25 CDT 2005
i686
2005-12-08 10:50:10 -- --cfg: /etc/mrtg/mrtg2.cfg[23]: # Contact: Root
<root at localhost> (configure /etc/snmp/snmp.local.conf)
2005-12-08 10:50:10 -- --cfg: /etc/mrtg/mrtg2.cfg[24]: # Location:
Unknown (edit /etc/snmp/snmpd.conf)
2005-12-08 10:50:10 -- --cfg: /etc/mrtg/mrtg2.cfg[25]:
######################################################################
2005-12-08 10:50:10 -- --cfg: /etc/mrtg/mrtg2.cfg[26]:
2005-12-08 10:50:10 -- --cfg: /etc/mrtg/mrtg2.cfg[27]:
2005-12-08 10:50:10 -- --base: Reading Interface Config cache
2005-12-08 10:50:10 -- --base: Checking Config File
2005-12-08 10:50:10 -- --dir: ensure path IN: '/var/www/mrtg'
2005-12-08 10:50:10 -- --dir: ensure path OUT: '/var/www/mrtg/'
2005-12-08 10:50:10 -- --dir: imagehtml =
2005-12-08 10:50:10 -- --base: Loading default Locale
2005-12-08 10:50:10 -- --base: Starting main Loop
2005-12-08 10:50:10 -- --time: loop start Thu Dec 8 10:50:10 2005
2005-12-08 10:50:10 -- --base: Populate Target object by polling SNMP
and external Datasources
2005-12-08 10:50:10 -- --time: snmp read start Thu Dec 8 10:50:10 2005
2005-12-08 10:50:10 -- --time: target loop start Thu Dec 8 10:50:10
2005
2005-12-08 10:50:10 -- --base: Exit main Loop
2005-12-08 10:50:10 -- --base: Remove Lock Files
2005-12-08 10:50:10 -- --base: Store Interface Config Cache
On Dec 8, 2005, at 10:46 AM, Ruttenberg, Tanya wrote:
> Did you try running mrtg with debugging flags on? You can also turning
> logging at the command line to capture your output. At least then you
> would know what it's doing and you might even see an error. Look at
> the man page for options.
>
> Tanya Ruttenberg - RSIS Contractor
> OTSO/DNE/NMPEB
> tanya.ruttenberg at ssa.gov
> 410-965-9605
>
>
> -----Original Message-----
> From: mrtg-bounce at list.ee.ethz.ch [mailto:mrtg-bounce at list.ee.ethz.ch]
> On
> Behalf Of Matt Kowske
> Sent: Thursday, December 08, 2005 10:43 AM
> To: mrtg at list.ee.ethz.ch
> Subject: [mrtg] mrtg produces no output
>
> Hi I'm having a problem with mrtg. I've set it up with cfgmaker and
> made sure the WorkDir option is set to a directory that exists and is
> writeable.
> I run "mrtg mrtg.cfg" and it runs fine with no errors but no output is
> produced in the WorkDir. Nothing. No png's, or html's or anything.
> I've
> tried it with two different cfg files that point to two different snmp
> servers, but neither work. I've searched google, groups,
> documentation and can't find any kind of solution to this. I can post
> config files if needed.
> I remember the first time I ran it it DID produce something in the
> WorkDir, but I didn't have it set to the correct directory so I rm
> -rf'd it and tried again and that's when the problem started. Now no
> matter what I do I can't get any output.
> Also, this is on a CentOS box installed from an rpm. Thanks.
>
> --
> Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
> Archive http://lists.ee.ethz.ch/mrtg
> FAQ http://faq.mrtg.org Homepage http://www.mrtg.org
> WebAdmin http://lists.ee.ethz.ch/lsg2.cgi
--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive http://lists.ee.ethz.ch/mrtg
FAQ http://faq.mrtg.org Homepage http://www.mrtg.org
WebAdmin http://lists.ee.ethz.ch/lsg2.cgi
--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive http://lists.ee.ethz.ch/mrtg
FAQ http://faq.mrtg.org Homepage http://www.mrtg.org
WebAdmin http://lists.ee.ethz.ch/lsg2.cgi
More information about the mrtg
mailing list