[mrtg] Re: OID for Cisco 7606

[Stefano Giraldo]

Hi Joel, 
thank's for the OID, but for memory I used theese OID

1.3.6.1.4.1.9.9.48.1.1.1.6.1&1.3.6.1.4.1.9.9.48.1.1.1.5.1 

from Somix.com MRTG Repository and the graphs are right. 

For the temperature I've tried your suggested OID but its doesn't work... 

# snmpwalk -v 1 -c community router 1.3.6.1.4.1.9.9.13.1.3.1.3.1
# snmpwalk -v 1 -c community router 1.3.6.1.4.1.9.9.13.1.3.1.3.2 

So... there's no data.

Thank's anyway. 

Bye, 

        Ste.

> > -----Original Message-----
> > From: mrtg-bounce at list.ee.ethz.ch 
> > [mailto:mrtg-bounce at list.ee.ethz.ch] On Behalf Of Stefano Giraldo
> > Sent: Monday, February 07, 2005 6:46 AM
> > To: mrtg at list.ee.ethz.ch
> > Subject: [mrtg] OID for Cisco 7606
> > 
> > Hi,
> > anyone know the OID for memory util and temperature for the 
> > router in the subject?
> > 
> > Theese new router model can get the temperature and voltage 
> > for any slot...
> > so the OID should be longer that any other Cisco router.
> > 
> > # sh env temp
> > Load for five secs: 0%/0%; one minute: 5%; five minutes: 4% 
> > Time source is NTP, 12:40:50.086 MET Mon Feb 7 2005
> > 
> 
> Inlet   .1.3.6.1.4.1.9.9.13.1.3.1.3.1
> Outlet  .1.3.6.1.4.1.9.9.13.1.3.1.3.2
> 
> 
> > 
> > For the memory... I can get only the used mem and not the free.
> > 
> > The Cisco site wasn't helpful... but this is normal! :)
> > 
> 
> Available memory .1.3.6.1.4.1.9.2.1.8.0
> 
> Also CPU .1.3.6.1.4.1.9.2.1.58.0
> 
> --
> Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
> Archive     http://www.ee.ethz.ch/~slist/mrtg
> FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
> WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi
> 
> 

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi