[mrtg] Re: cpu utilization

Wed Feb 16 09:52:54 MET 2005

The first error states there is no SNMP response received.
Use an SNMP browser to check if the 1721 gives response to any SNMP request, and after that check what result the specific oid from your configfile gives with the SNMP tool.

Hth,

Jan.

-----Original Message-----
From: Plantier, Spencer [mailto:spencer.plantier at stratech.com]
Sent: Tuesday, February 15, 2005 8:32 PM
To: mrtg at list.ee.ethz.ch
Subject: [mrtg] Re: cpu utilization

Thanks that got me further, now I get this error:

Target[172.30.232.1]: 1.3.6.1.4.1.9.9.109.1.1.1.1.5.0&1.3.6.1.4.1.9.9.109.1.1.1.1.5.0:stiwanro
@172.30.232.1

YLegend[172.30.232.1]: CPU Utilization

ShortLegend[172.30.232.1]: %

MaxBytes[172.30.232.1]: 100

Options[172.30.232.1]: nopercent, gauge, unknaszero

Unscaled[172.30.232.1]: dwmy

Legend1[172.30.232.1]: CPU Utilization

Legend2[172.30.232.1]: .

Legend3[172.30.232.1]: Max value per interval on graph

Legend4[172.30.232.1]: .

LegendI[172.30.232.1]: CPU:

LegendO[172.30.232.1]: .

Title[172.30.232.1]: $DEVICE

PageTop[172.30.232.1]: <H1>$DEVICE</H1>

Colours[172.30.232.1]: GREEN#00eb0c,BLUE#0000ff,GRAY#AAAAAA,VIOLET#ff00ff

WithPeak[172.30.232.1]: ymw

C:\MRTG\bin>perl mrtg springboard.cfg

SNMP Error:

no response received

SNMPv1_Session (remote host: "172.30.232.1" [172.30.232.1].160)

                  community: "stiwanro"

                 request ID: -943698335

                PDU bufsize: 8000 bytes

                    timeout: 2s

                    retries: 5

                    backoff: 1)

SNMPGET Problem for 1.3.6.1.4.1.9.9.109.1.1.1.1.5.0 1.3.6.1.4.1.9.9.109.1.1.1.1.

5.0 sysUptime sysName on stiwanro at 172.30.232.1:160

WARNING: skipping because at least the query for 1.3.6.1.4.1.9.9.109.1.1.1.1.5.0

 on  172.30.232.1 did not succeed

ERROR: Target[172.30.232.1][_IN_] ' $$target[4]{$mode} ' did not eval into defin

ed data

ERROR: Target[172.30.232.1][_OUT_] ' $$target[4]{$mode} ' did not eval into defi

ned data

WARNING: Skipping Update of 172.30.232.1, inlast is not defined

WARNING: Skipping Update of 172.30.232.1, outlast is not defined

C:\MRTG\bin>

Thanks,

Spencer

________________________________

From: Muhammed Ali [mailto:mammali at horizon-satellite.com]
Sent: Tuesday, February 15, 2005 1:39 PM
To: Plantier, Spencer; mrtg at list.ee.ethz.ch
Subject: RE: [mrtg] cpu utilization

All the MRTG configuration lines  should start from column 1 other wise that line will be neglected by MRTG.

Regards

Muhammed Ali

-----Original Message-----
From: mrtg-bounce at list.ee.ethz.ch [mailto:mrtg-bounce at list.ee.ethz.ch]
On Behalf Of Plantier, Spencer
Sent: Tuesday, February 15, 2005 8:22 PM
To: mrtg at list.ee.ethz.ch
Subject: [mrtg] cpu utilization

I went to Somix and got the configuration for CPU usage for a 1721. I

copied and pasted the config to my cfg file and I get the following

error:

arget[xxxxx]:

1.3.6.1.4.1.9.9.109.1.1.1.1.5.0&1.3.6.1.4.1.9.9.109.1.1.1.1.5.0:stiwanro

@xxxxx

YLegend[xxxxx]: CPU Utilization

 ShortLegend[xxxxx]: %

 MaxBytes[xxxxx]: 100

Options[xxxxx]: nopercent, gauge, unknaszero

 Unscaled[xxxxx]: dwmy

Legend1[xxxxx]: CPU Utilization

 Legend2[xxxxx]: .

 Legend3[xxxxx]: Max value per interval on graph

 Legend4[xxxxx]: .

 LegendI[xxxxx]: CPU:

LegendO[xxxxx]: .

Title[xxxxx]: $DEVICE

PageTop[xxxxx]: <H1>$DEVICE</H1>

Colours[xxxxx]: GREEN#00eb0c,BLUE#0000ff,GRAY#AAAAAA,VIOLET#ff00ff

WithPeak[xxxxx]: ymw

C:\MRTG\bin>perl mrtg springboard.cfg

WARNING: "MaxBytes[xxxxx]" not specified

WARNING: Option[xxxxx]: "unscaled[xxxxx]:" is unknown

WARNING: Option[xxxxx]: "dwmy" is unknown

ERROR: Please fix the error(s) in your config file

I googled the error to no avail. Any help would be appreciated.

Thanks.

Spencer Plantier

System Network Administrator

301 Gregson Dr

Cary, NC  27511

Office 919-379-8513

Cell    919-272-8833

spencer.plantier at stratech.com

--

Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe

Archive     http://www.ee.ethz.ch/~slist/mrtg

FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org

WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi

_________________________________________________________

Het ministerie van Sociale Zaken en Werkgelegenheid sluit elke aansprakelijkheid uit in verband met het niet juist, onvolledig of niet tijdig overkomen van de informatie in deze e-mail.
Aan dit bericht kunnen geen rechten worden ontleend.

Dit bericht is alleen bestemd voor de geadresseerde. Indien dit bericht niet voor u bestemd is, verzoeken wij u dit onmiddellijk aan ons te melden en de inhoud van dit bericht te vernietigen.
_________________________________________________________

The ministry of Social Affairs and Employment is not liable for any incorrect or incomplete transmission of the information in this e-mail or for any delay in its receipt.
This message shall not constitute any obligations.

This message is intended solely for the addressee.
If you have received this message in error, please inform us immediately and delete its content.
_________________________________________________________

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi