[mrtg] FW: MRTG setup

[Rebecca Howett]

Hello,
I am trying to get MRTG working but am having some problems.  When I try to
create a cfg file for my device using cfgmaker I get an error saying
'HighspeedCounters faild ... Droping back to V1'' and then everything in the
generated cfg file is commented out.  Below is the command I'm running and
the output I get.  Any help would be greatly appreciated.
thanks,
Rebecca

C:\mrtg\mrtg\bin>perl cfgmaker AugustaBHM at 172.16.10.1:::::2 --global
"WorkDir: c
:\mrtg\wwwroot" --output bhm.cfg

--base: Get Device Info on AugustaBHM at 172.16.10.1:::::2
--base: Vendor Id:
--base: Populating confcache
--snpo: confcache AugustaBHM at 172.16.10.1:::::2 Descr Motorola PowerQUICC
FEC -->
1
--snpo: confcache AugustaBHM at 172.16.10.1:::::2 Descr Canopy Point to
Point --> 2

--snpo: confcache AugustaBHM at 172.16.10.1:::::2 Ip 127.0.0.1 --> 6
--snpo: confcache AugustaBHM at 172.16.10.1:::::2 Ip 172.16.10.1 --> 1
--snpo: confcache AugustaBHM at 172.16.10.1:::::2 Ip 192.168.101.1 --> 2
--snpo: confcache AugustaBHM at 172.16.10.1:::::2 Name 1 --> 1
--snpo: confcache AugustaBHM at 172.16.10.1:::::2 Name 2 --> 2
--snpo: confcache AugustaBHM at 172.16.10.1:::::2 Type 6 --> 1
--snpo: confcache AugustaBHM at 172.16.10.1:::::2 Type 6 --> 2 (duplicate)
--snpo: confcache AugustaBHM at 172.16.10.1:::::2 Eth 0a-00-3e-f1-97-96 --> 1
--snpo: confcache AugustaBHM at 172.16.10.1:::::2 Eth 1a-00-3e-f1-97-96 --> 2
--base: Get Interface Info
--base: Walking ifIndex
--base: Walking ifType
--base: Walking ifAdminStatus
--base: Walking ifOperStatus
--base: Walking ifHighSpeed
--base: snmpget AugustaBHM at 172.16.10.1:::::2 for ifHighSpeed.1 -> 0 Mb/s
--base: snmpget AugustaBHM at 172.16.10.1:::::2 for ifHCInOctets.1 -> 110210153
--base: check for HighspeedCounters faild ... Droping back to V1
--base: snmpget AugustaBHM at 172.16.10.1:::::2 for ifHighSpeed.2 -> 0 Mb/s
--base: snmpget AugustaBHM at 172.16.10.1:::::2 for ifHCInOctets.2 -> 617437645
--base: check for HighspeedCounters faild ... Droping back to V1
--base: snmpget AugustaBHM at 172.16.10.1:::::2 for ifHighSpeed.6 -> Mb/s
--base: snmpget AugustaBHM at 172.16.10.1:::::2 for ifHCInOctets.6 ->
--base: check for HighspeedCounters faild ... Droping back to V1
--base: Writing bhm.cfg


--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://lists.ee.ethz.ch/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://lists.ee.ethz.ch/lsg2.cgi