[mrtg] Re: Paradyne 4200IP DSLAM

[PAUL WILLIAMSON]

Do you have unkaszero?  Compare the first line of both the log and the
old files.
Those numbers look huge.  It doesn't seem lile all is right with the
values 
you're collecting.

Any time I've seen a completely straight flatline like that, it has
always 
been a configuration issue, with the way I'm polling, the options I 
have configured, or the way the device is responding.

What does an snmpget show from the command line?

Paul

>>> "Anson Rinesmith" <arinesmith at bigrivertelephone.com> 05/31/05 9:57
PM >>>
Daily' Graph (5 Minute Average)
 Max  In: 958.1 kb/s (9.4%)   Average  In: 958.1 kb/s (9.4%)   Current 
In: 
958.1 kb/s (9.4%)
      Max  Out: 0.0 b/s (0.0%)   Average  Out: 0.0 b/s (0.0%)   Current

Out: 0.0 b/s (0.0%)

still no change, new data just like old
1117590931 2909267236 2893818450
1117590931 119757 0 119757 0
1117590728 119757 0 119757 0
1117590600 119757 0 119757 0
1117590300 119757 0 119757 0
1117590000 119757 0 119757 0
1117589700 119757 0 119757 0

----- Original Message ----- 
From: "PAUL WILLIAMSON" <pwilliamson at mandtbank.com>
To: <arinesmith at bigrivertelephone.com>; <mrtg at list.ee.ethz.ch>
Sent: Tuesday, May 31, 2005 8:45 PM
Subject: [mrtg] Re: Paradyne 4200IP DSLAM


> No problemo.  From the look of that picture, your MaxBytes is set
too
> low.
> Double your MaxBytes and I bet your graphs will change as well.
>
> Paul
>
>>>> "Anson Rinesmith" <arinesmith at bigrivertelephone.com> 05/31/05
9:34
> PM >>>
> Sorry, thought I pasted the picture, not link.
>
>
> ----- Original Message ----- 
> From: "PAUL WILLIAMSON" <pwilliamson at mandtbank.com>
> To: <arinesmith at bigrivertelephone.com>; <mrtg at list.ee.ethz.ch>
> Sent: Tuesday, May 31, 2005 9:14 AM
> Subject: [mrtg] Re: Paradyne 4200IP DSLAM
>
>
>> It helps if you send along a password to get into the site so
>> we can see what you're talking about or put the png in an
>> unprotected area.
>>
>> Is the line a total mesa, or does it look like a lawn, where
>> there are tiny peaks and valleys?
>>
>> Paul
>>
>>>>> "Anson Rinesmith" <arinesmith at bigrivertelephone.com> 05/31/05
> 9:51
>> AM >>>
>> Content-Type: text/plain;
>> charset="us-ascii"
>> Content-Transfer-Encoding: quoted-printable
>> Anyone had luck querying a Paradyne 4200IP DSLAM?
>> cfgmaker ran, and it collects data when running MRTG, but the data
=
>> doesn't
>> make any sense. I know users aren't using the exact bandwidth all
> the
>> =
>> time.
>> day
>>
>
<http://tgraph.bigrivertel.net/cape-paradyne01/216.89.150.34_1001006-day.=

>
>>
>> png
>>>=20
>>
>>
>>
>> -- Attached file removed by Ecartis and put at URL below --
>> -- Type: image/png
>> -- Size: 1k (1490 bytes)
>> -- URL : http://lists.ee.ethz.ch/p/216.89.150.34_1001006-day.png 
>>
>>
>> --
>> Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe

>> Archive     http://lists.ee.ethz.ch/mrtg 
>> FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org

>> WebAdmin    http://lists.ee.ethz.ch/lsg2.cgi 
>>
>>
>>
>> --
>> Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe

>> Archive     http://lists.ee.ethz.ch/mrtg 
>> FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org

>> WebAdmin    http://lists.ee.ethz.ch/lsg2.cgi 
>>
>
> --
> Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe 
> Archive     http://lists.ee.ethz.ch/mrtg 
> FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org 
> WebAdmin    http://lists.ee.ethz.ch/lsg2.cgi 
> 

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://lists.ee.ethz.ch/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://lists.ee.ethz.ch/lsg2.cgi