[mrtg] unscaled not working all of the time, better description this time (sorry)

[Andrew Hull]

Hello,
This is an interesting issue with Unscaled. In the following mrtg.cfg, 
the lower interface is affected by the Unscaled[_] default, but the 
upper is not.
 
Graphs can be seen here:
http://tbx.racc2000.com/mrtg/fa0.html
http://tbx.racc2000.com/mrtg/calls.html
 
The only difference I see is how I reference the interface, OID via 
interface name. Using MRTG 2.12.1. When I put an Unscaled line in each 
interface and drop the default statement, there is no apparent change (I 
did wait for the graphs to update a few times).
 
Any ideas?

Thanks,
Andrew


<SNIP>-------------------------------------------------------------
[mrtg at tbx mrtg]$ cat mrtg.cfg
EnableIPv6: no
WorkDir: /var/www/html/mrtg
Options[_]: bits,growright
Unscaled[_]: dwmy


### Interface 2

Target[fa0]: 2:community at 10.0.0.1:
SetEnv[fa0]: MRTG_INT_IP="69.54.200.218" MRTG_INT_DESCR="FastEthernet0"
#MaxBytes[fa0]: 12500000
MaxBytes[fa0]: 250000
Title[fa0]: Traffic Analysis for 2 (fa0)
PageTop[fa0]: <h1>Traffic Analysis for 2 (fa0)</h1>
                <div id="sysdetails">
                        <table>
                                <tr>
                                        <td>System:</td>
                                        <td>Access Server</td>
                                </tr>
                                <tr>
                                        <td>Description:</td>
                                        <td>FastEthernet0  </td>
                                </tr>
                                <tr>
                                        <td>ifType:</td>
                                        <td>ethernetCsmacd (6)</td>
                                </tr>
                                <tr>
                                        <td>ifName:</td>
                                        <td>Fa0</td>
                                </tr>
                                <tr>
                                        <td>Max Speed:</td>
                                        <td>100.0 Mbits/s, but MaxBytes 
set to Bandwidth (2Mbits/s)</td>
                                </tr>

                        </table>
                </div>


### Calls

Target[calls]: 
1.3.6.1.4.1.9.10.19.1.1.4.0&1.3.6.1.4.1.9.9.47.1.1.6.0:community at 10.0.0.1:
SetEnv[calls]: MRTG_INT_IP="69.54.200.218" MRTG_INT_DESCR="Calls"
MaxBytes[calls]: 184
Options[calls]: gauge,growright
Title[calls]: Calls
PageTop[calls]: <h1>Calls</h1>
                <div id="sysdetails">
                        <table>
                                <tr>
                                        <td>System:</td>
                                        <td>Access Server</td>
                                </tr>
                                <tr>
                                        <td>Description:</td>
                                        <td>Modem Usage</td>
                                </tr>
                                <tr>
                                        <td>Max Users:</td>
                                        <td>184</td>
                                </tr>

                        </table>
                </div>
------------------------------------------------<!SNIP>

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://lists.ee.ethz.ch/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://lists.ee.ethz.ch/lsg2.cgi