[mrtg] Re: problem with snmp on windows 2000

Charley Morgan c.morgan at megagate.com
Tue Nov 29 16:35:13 MET 2005


That is excellent information.  Thanks very much.  I was wondering if that
could be the problem but surfing around last night I could not find anywhere
that said what was included in the standard windows 2000 mib.

Thanks, 


 ______________________________________________________ 
Charley Morgan
Internet Engineer
Megagate Broadband

' Tel: (601) 450-5000 
* Email: c.morgan at megagate.com
______________________________________________________

-----Original Message-----
From: mrtg-bounce at list.ee.ethz.ch [mailto:mrtg-bounce at list.ee.ethz.ch] On
Behalf Of William Owen
Sent: Tuesday, November 29, 2005 9:31 AM
To: mrtg at list.ee.ethz.ch
Subject: [mrtg] Re: problem with snmp on windows 2000

The included SNMP agent for a Windows box does not provide the metrics you
really need to monitor it.  You will need to find either alternate means of
monitor your MS box or install something like SNMP Informant
(http://www.wtcs.org/) in order to extend functionality.

-----Original Message-----
From: Cleaveland, AJ Allan @ IS [mailto:Allan.J.Cleaveland at L-3com.com] 
Sent: Tuesday, November 29, 2005 8:38 AM
To: mrtg at list.ee.ethz.ch
Subject: [mrtg] Re: problem with snmp on windows 2000

MRTG only detects certain things automatically, specifically traffic going
over interfaces.  You're going to have to look up the MIBs you need yourself
and set them up in your .cfg file yourself.  The examples already include an
example of CPU utilization.

Allan Cleaveland

-----Original Message-----
From: mrtg-bounce at list.ee.ethz.ch [mailto:mrtg-bounce at list.ee.ethz.ch] On
Behalf Of Charley Morgan
Sent: Tuesday, November 29, 2005 8:33 AM
To: mrtg at list.ee.ethz.ch
Subject: [mrtg] problem with snmp on windows 2000


Content-Type: text/plain;
	charset="US-ASCII"
Content-Transfer-Encoding: 7bit
I just installed the SNMP service on a Windows 2000 server and have set my
communities and everything.  However, when I use cfgmaker, or any other
polling software, I am only seeing 2 interfaces.  What do I need to do to be
able to see the processor utilization, memory stats, etc?  I think I am
missing something and I can't figure out why?
 
Thanks for any info,
 
 ______________________________________________________ 
Charley Morgan
Internet Engineer
Megagate Broadband
 <blocked::http://www.megagate.com/> 
' Tel: (601) 450-5000 
* Email: c.morgan at megagate.com <blocked::mailto:c.morgan at megagate.com> 
______________________________________________________
 



-- Attached file removed by Ecartis and put at URL below --
-- Type: image/gif
-- Size: 2k (2725 bytes)
-- URL : http://lists.ee.ethz.ch/p/54-logo.gif


--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://lists.ee.ethz.ch/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://lists.ee.ethz.ch/lsg2.cgi

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://lists.ee.ethz.ch/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://lists.ee.ethz.ch/lsg2.cgi

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://lists.ee.ethz.ch/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://lists.ee.ethz.ch/lsg2.cgi



--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://lists.ee.ethz.ch/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://lists.ee.ethz.ch/lsg2.cgi



More information about the mrtg mailing list