[mrtg] Re: MRTG is not ploting 6513 Portchannel corectly

[Daniel J McDonald]

On Tue, 2005-10-25 at 17:02 -0500, Biju Kurian wrote:
> I have a port channel which is 4 gig ports etherchanneled together.
> Each individual ports are showing correct values. But the port channel
> graphs incorrectly. snmpget shows the correct value though. WHere can
> i modify in such a way that it should show the correct value..

You will need to specify snmp v2 (or snmp v3, if you are using a 2.13
beta).  SNMP v1, which your syntax below is referencing, provides
un-reliable results for all data rates greater than about 120mb/s.

> Target[10-77-18-131_317]: 317:public at 10-77-18-131_317: 
add ::::2 to the target statement for snmp V2.

-- 
Daniel J McDonald, CCIE # 2495, CNX, CISSP # 78281
Austin Energy

dan.mcdonald at austinenergy.com

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://lists.ee.ethz.ch/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://lists.ee.ethz.ch/lsg2.cgi