[mrtg] Re: Problem with Unscaled

Charley Morgan c.morgan at megagate.com
Fri Oct 28 22:24:40 MEST 2005


Here is my config:

### Global Config Options

#  for UNIX
WorkDir: /var/www/html/mrtg
RunAsDaemon: Yes
Interval: 5
Options[_]: growright, bits, noinfo
Unscaled[_]: dwmy
LogDir: /usr/local/mrtg-2/logs
Refresh: 300
EnableIPv6: no

######################################################################
# System: cisco7613
# Description: Cisco Internetwork Operating System Software 
#          IOS (tm) s72033_rp Software (s72033_rp-PK9SV-M), Version
12.2(18)SXD5, RELEASE SOFTWARE (fc3)
#          Technical Support: http://www.cisco.com/techsupport
#          Copyright (c) 1986-2005 by cisco Systems, Inc.
#          Compiled Fri
# Contact: ie at megagate.com
# Location: Ivey Lane
######################################################################


### Interface 12 >> Descr: 'Serial6/0/0' | Name: 'Se6/0/0' | Ip:
'160.81.70.134' | Eth: '' ###
 

Target[Sprint]: 12:9cR2npZ at 208.24.218.100:
SetEnv[Sprint]: MRTG_INT_IP="160.81.70.134" MRTG_INT_DESCR="Serial6/0/0"
MaxBytes[Sprint]: 2250000
Title[Sprint]: Traffic Analysis for Sprint Network Uplink  - 18MB
PageTop[Sprint]: <h1>Traffic Analysis for Sprint Network Uplink - 18MB</h1>
                <div id="sysdetails">
                        <table>
                                <tr>
                                        <td>System:</td>
                                        <td>cisco7613 in Ivey Lane</td>
                                </tr>
                                <tr>
                                        <td>Maintainer:</td>
                                        <td>ie at megagate.com</td>
                                </tr>
                                <tr>
                                        <td>Description:</td>
                                        <td>Serial6/0/0 Sprint Uplink -
Hattiesburg POP - 18MB </td>
                                </tr>
                                <tr>
                                        <td>ifType:</td>
                                        <td>propPointToPointSerial (22)</td>
                                </tr>
                                <tr>
                                        <td>ifName:</td>
                                        <td>Se6/0/0</td>
                                </tr>
                                <tr>
                                        <td>Max Speed:</td>
                                        <td>2250.0 kBytes/s</td>
                                </tr>
 

                                <tr>
                                        <td>Ip:</td>
                                        <td>160.81.70.134
(sl-megag-2-0.sprintlink.net)</td>
                                </tr>
 

                        </table>
                </div>
Directory[Sprint]: sprint
 

 

#######
#######
#######

### Interface 330 >> Descr: 'ATM13/0/0.1-aal5-layer' | Name: '' | Ip:
'64.200.126.150' | Eth: '' ###
 

Target[WillTel]: 330:9cR2npZ at 208.24.218.100:
SetEnv[WillTel]: MRTG_INT_IP="64.200.126.150"
MRTG_INT_DESCR="ATM13/0/0.1-aal5-layer"
MaxBytes[WillTel]: 1500000
Title[WillTel]: Traffic Analysis for WillTel Network Uplink - 12MB
PageTop[WillTel]: <h1>Traffic Analysis for WillTel Network Uplink -
18MB</h1>
                <div id="sysdetails">
                        <table>
                                <tr>
                                        <td>System:</td>
                                        <td>cisco7613 in Ivey Lane</td>
                                </tr>
                                <tr>
                                        <td>Maintainer:</td>
                                        <td>ie at megagate.com</td>
                                </tr>
                                <tr>
                                        <td>Description:</td>
                                        <td>ATM13/0/0.1-aal5-layer  </td>
                                </tr>
                                <tr>
                                        <td>ifType:</td>
                                        <td>aal5 (49)</td>
                                </tr>
                                <tr>
                                        <td>ifName:</td>
                                        <td></td>
                                </tr>
                                <tr>
                                        <td>Max Speed:</td>
                                        <td>1500.0 kBytes/s</td>
                                </tr>
 

                                <tr>
                                        <td>Ip:</td>
                                        <td>64.200.126.150
(drvlga1wct1-wholesalecarrier-atm.wcg.net)</td>
                                </tr>
 

                        </table>
                </div>
Directory[WillTel]: willtel


###
###
### 


 ______________________________________________________ 
Charley Morgan
Internet Engineer
Megagate Broadband

' Tel: (601) 450-5000 
* Email: c.morgan at megagate.com
______________________________________________________

-----Original Message-----
From: mrtg-bounce at list.ee.ethz.ch [mailto:mrtg-bounce at list.ee.ethz.ch] On
Behalf Of Anson Rinesmith
Sent: Friday, October 28, 2005 3:10 PM
To: mrtg at list.ee.ethz.ch
Subject: [mrtg] Re: Problem with Unscaled

What do you have in your config?

-----Original Message-----
From: mrtg-bounce at list.ee.ethz.ch [mailto:mrtg-bounce at list.ee.ethz.ch] On
Behalf Of Charley Morgan
Sent: Friday, October 28, 2005 12:55 PM
To: mrtg at list.ee.ethz.ch
Subject: [mrtg] Problem with Unscaled

Content-Type: text/plain;
	charset="us-ascii"
Content-Transfer-Encoding: 7bit
I just downloaded the newest version of MRTG form the web and I am now
having problems with Unscaled working.  I have 2 DS3 interfaces in a Cisco
router that I am monitoring and even with the unscaled option they are
always scaled.  I am running an older version with the exact scale command
and they work fine.
 
The first time I start up MRTG and there is no graph data everything looks
correct, but as soon as data hits it starts scaling the graphs.
 
Any idea what would cause this?
 
Thanks,
 
 ______________________________________________________ 
Charley Morgan
Internet Engineer
Megagate Broadband
 <blocked::http://www.megagate.com/> 
' Tel: (601) 450-5000 
* Email: c.morgan at megagate.com <blocked::mailto:c.morgan at megagate.com> 
______________________________________________________
 



-- Attached file removed by Ecartis and put at URL below --
-- Type: image/gif
-- Size: 2k (2725 bytes)
-- URL : http://lists.ee.ethz.ch/p/53-logo.gif


--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://lists.ee.ethz.ch/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://lists.ee.ethz.ch/lsg2.cgi

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://lists.ee.ethz.ch/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://lists.ee.ethz.ch/lsg2.cgi



--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://lists.ee.ethz.ch/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://lists.ee.ethz.ch/lsg2.cgi



More information about the mrtg mailing list