[mrtg] Re: Cisco 2509 async port byte counters ... Any clues?

[kelsey hudson]

No, that still gives me the same results.

Again, let me explain my configuration/situation.

The serial ports are connected to various non-IP devices, such as switch 
consoles, serial printers, UPSes, serial terminals, and consoles of sun 
machines.

I'm looking for raw serial traffic, not protocol traffic. The As1-8 
interfaces *only* get their traffic counters updated when IP traffic 
flows through those interfaces. Since none of the traffic to those ports 
is IP, I get no usage statistics. Hence, the interfaces As1-As8 are 
useless for tracking this information.

I'm looking for an OID (if one even exists) which represents the raw 
byte counters for each of the individual tty lines, 1-8. The standard 
MIB for ifInOctets et al will not work for these interfaces.

I'll do some poking around. I'll dump the entire mib tree and see if I 
can manually parse it for the information needed.

Thanks,
-Kelsey

warren.auld at ded.mo.gov wrote:

> Sounds like you've got a "--ifref=ip" in your cfgmaker invocation. Try
> using "--ifref=name". If should generate target lines for you async ports
> that look like
> 
> Target[Router_AsX]: #AsX:Community at Router:

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://lists.ee.ethz.ch/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://lists.ee.ethz.ch/lsg2.cgi