[mrtg] Re: problzem with a script, datas file log and old not udating

[Koelstra, J. (Jan)]

Laurent,

By default MRTG will compute the rate per second. Assuming you have the normal 5 minute interval between 2 polls the difference between the old and new value need to be over 300 to graph 1 per second.
You can add 'Gauge' at the options line to graph the values as they are polled. The gauge option however causes graphs to grow steady over time.
The perminute or perhour options are alternatives that compute the rate per minute or per hour.

HTH,

Jan.

-----Original Message-----
From: mrtg-bounce at list.ee.ethz.ch [mailto:mrtg-bounce at list.ee.ethz.ch] On Behalf Of Zargos
Sent: Tuesday, February 21, 2006 2:57 PM
To: mrtg at list.ee.ethz.ch
Subject: [mrtg] problzem with a script, datas file log and old not udating


Hi,

my MaxBytes is 125000, and my values are between 11000 and 12000 with a
difference of 10 to 100.

My log file is updated with the value of the new measure.measure, and
the old file take the value of the old log file.

but the difference between new and old value is not computed.

The datas for graphs stay at zero all of the time.

I can't find why

laurent

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://lists.ee.ethz.ch/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://lists.ee.ethz.ch/lsg2.cgi


_________________________________________________________

Het ministerie van Sociale Zaken en Werkgelegenheid sluit elke aansprakelijkheid uit in verband met het niet juist, onvolledig of niet tijdig overkomen van de informatie in deze e-mail.
Aan dit bericht kunnen geen rechten worden ontleend.

Dit bericht is alleen bestemd voor de geadresseerde. Indien dit bericht niet voor u bestemd is, verzoeken wij u dit onmiddellijk aan ons te melden en de inhoud van dit bericht te vernietigen.
_________________________________________________________

The ministry of Social Affairs and Employment is not liable for any incorrect or incomplete transmission of the information in this e-mail or for any delay in its receipt.
This message shall not constitute any obligations.

This message is intended solely for the addressee.
If you have received this message in error, please inform us immediately and delete its content.
_________________________________________________________

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://lists.ee.ethz.ch/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://lists.ee.ethz.ch/lsg2.cgi