[mrtg] Re: problem with regular expression in Target

[Castle, Shane]

Hmm, I don't have anything that divides the result but I do have
additions, and they all have at least one colon (":") after the
target IP address.

--
Shane Castle

-----Original Message-----
From: mrtg-bounce at list.ee.ethz.ch [mailto:mrtg-bounce at list.ee.ethz.ch]
On Behalf Of Charley Morgan
Sent: Tuesday, January 31, 2006 10:41
To: mrtg at list.ee.ethz.ch
Subject: [mrtg] problem with regular expression in Target

Content-Type: text/plain;
	charset="us-ascii"
Content-Transfer-Encoding: 7bit
I have a multi-processor system that I am trying to calculate the
average
utilization of both.  Here is what I have:
 
Target[processor]: (
.1.3.6.1.2.1.25.3.3.1.2.1&.1.3.6.1.2.1.25.3.3.1.2.1:public at 10.10.10.10 +
.1.3.6.1.2.1.25.3.3.1.2.2&.1.3.6.1.2.1.25.3.3.1.2.2:public at 10.10.10.10 )
/2
 
Why would this not work correctly?  It is not reporting any errors but
nothing is ever being graphed when I know the processor load is fairly
high.
 
 ______________________________________________________ 
Charley Morgan
Internet Engineer
Megagate Broadband
 <blocked::http://www.megagate.com/> 
' Tel: (601) 450-5000 
* Email: c.morgan at megagate.com <blocked::mailto:c.morgan at megagate.com> 
______________________________________________________
 



-- Attached file removed by Ecartis and put at URL below --
-- Type: image/gif
-- Size: 2k (2725 bytes)
-- URL : http://lists.ee.ethz.ch/p/59-logo.gif


--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://lists.ee.ethz.ch/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://lists.ee.ethz.ch/lsg2.cgi

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://lists.ee.ethz.ch/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://lists.ee.ethz.ch/lsg2.cgi