[mrtg] Re: Y range on the graphs

[Mike Banks]

Nope, I was still using the base install.    Unless there is another way, looks like I may be working on converting to RRDTool
> Subject: [mrtg] Re: Y range on the graphs> Date: Mon, 24 Jul 2006 11:13:23 +1200> From: s.shipway at auckland.ac.nz> To: mbanks850 at hotmail.com> CC: mrtg at list.ee.ethz.ch> > > Is there a way to get the Y axis on the graphs to not start > > at 0? I am graphing temperature that doesn't stray to far > > from the medium maybe +/- 5 degrees. So I want the Y axis to > > start at 60 degrees and let the max float.> > Yes.  If you are calling RRDTool directly, there are various options to> set the Y-axis - you can read the RRDTool documentation for this.> > If you use routers2 as your frontend, then you can pass these options in> the .cfg file.  Make sure you have routers.cgi v2.16b7 or later for> this.> > routers.cgi*LowerLimit[xxx]: 5> routers.cgi*UpperLimit[xxx]: 15> > will give you a graph with y-range from 5 to 15.  You can also add> > routers.cgi*Options[xxx]: rigid unscaled> > to make this a hard limit (IE, it won't show outside this range even if> the data lies outside it).> > Steve> > --> Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe> Archive     http://lists.ee.ethz.ch/mrtg> FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org> WebAdmin    http://lists.ee.ethz.ch/lsg2.cgi> 
_________________________________________________________________
Express yourself: design your homepage the way you want it with Live.com.
http://www.live.com/getstarted
--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://lists.ee.ethz.ch/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://lists.ee.ethz.ch/lsg2.cgi