[mrtg] Lucent PSAX MRTG...

[Rizwan Malik]

dear all,
i need help regarding MRTG of Lucent PSAX 2300.
i've its MIB and template file also but when i run cfgmaker with that
template file, it gives me error below, 

[root at nms /etc/mrtg]$ cfgmaker --host-template=/etc/mrtg/psax-
mibs/v1Ac120.template --output=/etc/mrtg/psax.cfg D0lsrd at 10.147.176.250
--base: Get Device Info on D0lsrd at 10.147.176.250:
--base: Vendor Id:
--base: Populating confcache
--snpo: confcache D0lsrd at 10.147.176.250: Descr ei0 --> 1
--snpo: confcache D0lsrd at 10.147.176.250: Descr lo0 --> 2
--snpo: confcache D0lsrd at 10.147.176.250: Descr ya0 --> 3
--snpo: confcache D0lsrd at 10.147.176.250: Descr ya1 --> 4
--snpo: confcache D0lsrd at 10.147.176.250: Descr ya2 --> 5
--snpo: confcache D0lsrd at 10.147.176.250: Type 6 --> 1
--snpo: confcache D0lsrd at 10.147.176.250: Type 24 --> 2
--snpo: confcache D0lsrd at 10.147.176.250: Type 1 --> 3
--snpo: confcache D0lsrd at 10.147.176.250: Type 1 --> 4 (duplicate)
--snpo: confcache D0lsrd at 10.147.176.250: Type 1 --> 5 (duplicate)
--snpo: confcache D0lsrd at 10.147.176.250: Ip 10.147.166.250 --> 3
--snpo: confcache D0lsrd at 10.147.176.250: Ip 10.147.176.250 --> 1
--snpo: confcache D0lsrd at 10.147.176.250: Ip 127.0.0.1 --> 2
--snpo: confcache D0lsrd at 10.147.176.250: Ip 244.244.244.200 --> 5
--snpo: confcache D0lsrd at 10.147.176.250: Ip 245.245.245.245 --> 4
--snpo: confcache D0lsrd at 10.147.176.250: Eth 00-60-1d-4d-32-f5 --> 1
--snpo: confcache D0lsrd at 10.147.176.250: Eth  --> 2
--snpo: confcache D0lsrd at 10.147.176.250: Eth 00-00-00-00-00-00 --> 3
--snpo: confcache D0lsrd at 10.147.176.250: Eth 00-00-00-00-00-00 --> 4
(duplicate)
--snpo: confcache D0lsrd at 10.147.176.250: Eth 00-00-00-00-00-00 --> 5
(duplicate)
--base: Get Interface Info
--base: Walking ifIndex
--base: Walking ifType
--base: Walking ifAdminStatus
--base: Walking ifOperStatus
--base: Walking ifSpeed
Bareword found where operator expected at (eval 4) line 3, near
"DEFINITIONS ::"
        (Do you need to predeclare DEFINITIONS?)
Bareword found where operator expected at (eval 4) line 10, near "1212
                        DisplayString"
        (Missing operator before DisplayString?)
Bareword found where operator expected at (eval 4) line 12, near
"IDENTIFIER ::"
        (Do you need to predeclare IDENTIFIER?)
Number found where operator expected at (eval 4) line 12, near
"enterprises  1751"
        (Do you need to predeclare enterprises?)
ERROR Evaluation of the contents in the file

/etc/mrtg/psax-mibs/v1Ac120.template
gave the error

"Can't modify constant item in predecrement (--) at (eval 4) line 1,
near "Version:"
syntax error at (eval 4) line 1, near "Version:"
syntax error at (eval 4) line 12, near "IDENTIFIER ::"
"

Exiting cfgmaker


--> I've attached its MIB and template file as well.

I need to do it urgent, please reply at earliest.

Please guide me how to use these files to get required MIB's of ATM
interfaces for PSAX.

Regards,
Rizwan Malik.


-- Attached file removed by Ecartis and put at URL below --
-- Type: text/plain
-- Size: 2694k (2759187 bytes)
-- URL : http://lists.ee.ethz.ch/p/ac120.my


-- Attached file removed by Ecartis and put at URL below --
-- Type: text/plain
-- Size: 2538k (2599447 bytes)
-- URL : http://lists.ee.ethz.ch/p/v1Ac120


--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://lists.ee.ethz.ch/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://lists.ee.ethz.ch/lsg2.cgi