[mrtg] Re: Layer 2 physical ethernet port

Koelstra, J. (Jan) JKoelstra at MINSZW.NL
Wed Nov 1 10:03:20 MET 2006


Bounto,

MRTG gathers its information by SNMP queries but it can also use the output of any script that feeds MRTG with the information.
If your device supoorts SNMP you have to check wich counters are available, but in general it should be possible to monitor physical ports with no IP-adresses.

The quickest way to check which counters are available is to run cfgmaker against the device you want to monitor. This will give you a basic (and ready to use) MRTG configfile with all network interfaces. For other statistics like CPU usage, memory usage, temperature etc. you can search the archive for templates or build your own.

HTH,

Jan.

-----Original Message-----
From: mrtg-bounce at list.ee.ethz.ch [mailto:mrtg-bounce at list.ee.ethz.ch] On Behalf Of Bounto Phaokanya
Sent: Tuesday, October 31, 2006 8:53 PM
To: mrtg at list.ee.ethz.ch
Subject: [mrtg] Layer 2 physical ethernet port


Hello, All

As it name implied, MRTG, Multi Router Traffic Grapher.  Does it only works on routers and layer 3 IP interfaces?  Can it also works on layer 2 physical ethernet ports with no IP addresses?

What can I use to gather traffic at layer 2 physical ethernet ports like what MRTG does?

Any idea is very much appreciated, thanks.

Bounto Phaokanya
MCTC

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://lists.ee.ethz.ch/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://lists.ee.ethz.ch/lsg2.cgi


_________________________________________________________

Dit bericht kan informatie bevatten die niet voor u is bestemd. Indien u niet de geadresseerde bent of dit bericht abusievelijk aan u is toegezonden, wordt u verzocht dat aan de afzender te melden en het bericht te verwijderen. De staat aanvaardt geen aansprakelijkheid voor schade, van welke aard ook, die verband houdt met risico's verbonden aan het elektronisch verzenden van berichten.
_________________________________________________________

This message may contain information that is not intended for you. If you are not the addressee or if this message was sent to you by mistake, you are requested to inform the sender and delete the message. The state accepts no liability for damage of any kind resulting from the risks inherent in the electronic transmission of messages.
_________________________________________________________

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://lists.ee.ethz.ch/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://lists.ee.ethz.ch/lsg2.cgi



More information about the mrtg mailing list