[mrtg] Re: NTI Enviromux

[Koelstra, J. (Jan)]

Tom,

If you look carefuly you will see the returned oid string is longer than the one you used in the snmpwalk command.
With snmpget it is important to use the exact oid.
Add ".0" to the end of the oid in your SNMPget command and you will be fine.

HTH,

Jan.

-----Original Message-----
From: mrtg-bounce at list.ee.ethz.ch [mailto:mrtg-bounce at list.ee.ethz.ch] On Behalf Of tom.voussure at sita.be
Sent: Wednesday, October 04, 2006 12:13 PM
To: mrtg at list.ee.ethz.ch
Subject: [mrtg] NTI Enviromux


Hi,
I've got a question concerning an NTI Enviromux.
(it's a network device for measuring the temperature).

I would like to graph the current temperature in MRTG. The oid to do this
is 1.3.6.1.4.1.3699.1.1.3.1.2.1.

When I do an snmp walk command (snmpwalk -c private -v 1 10.72.10.254
1.3.6.1.4.1.3699.1.1.3.1.2.1) I get the value back: SNMPv2-SMI::enterprises.3699.1.1.3.1.2.1.0 = INTEGER: 223 (where 223 = 22,3°)

When I try an snmpget (to use with mrtg), it failes:
snmpget -c private -v 1 10.72.10.254 1.3.6.1.4.1.3699.1.1.3.1.2.1
result:
Error in packet
Reason: (noSuchName) There is no such variable name in this MIB. Failed object: SNMPv2-SMI::enterprises.3699.1.1.3.1.2.1

Unfortunately (for as far as I know) mrtg can only use snmpget, and I
don't get any support from the manufacturer.

Can anybody help ?

Thanks,
tom
--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://lists.ee.ethz.ch/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://lists.ee.ethz.ch/lsg2.cgi


_________________________________________________________

Dit bericht kan informatie bevatten die niet voor u is bestemd. Indien u niet de geadresseerde bent of dit bericht abusievelijk aan u is toegezonden, wordt u verzocht dat aan de afzender te melden en het bericht te verwijderen. De staat aanvaardt geen aansprakelijkheid voor schade, van welke aard ook, die verband houdt met risico's verbonden aan het elektronisch verzenden van berichten.
_________________________________________________________

This message may contain information that is not intended for you. If you are not the addressee or if this message was sent to you by mistake, you are requested to inform the sender and delete the message. The state accepts no liability for damage of any kind resulting from the risks inherent in the electronic transmission of messages.
_________________________________________________________

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://lists.ee.ethz.ch/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://lists.ee.ethz.ch/lsg2.cgi