[mrtg] Re: AS 5300 VOIP and mrtg

[john]

Well, running the I command below, I receive

#show call resource voice stats

Resource Monitor -  Dial-up Resource Statistics Information:

DSP Statistics:

Utilization: 0 percent
Total channels: 30
Inuse channels: 0
Disabled channels: 0
Pending channels: 0
Free channels: 30

DS0 Statistics:

Utilization: 6 percent
Total channels: 124
Addressable channels: 90
Inuse channels: 2
Disabled channels: 60
Free channels: 28



The DSP is for the VOIP.


So, I just want to retrieve the number of voip calls using a OID



-----Original Message-----
From: Pavel Ruzicka [mailto:pavouk at pavouk.org] 
Sent: Thursday, October 12, 2006 12:38 AM
To: mrtg at list.ee.ethz.ch
Cc: john
Subject: Re: [mrtg] Re: AS 5300 VOIP and mrtg

Hello,

> Well, the AS 5300 is used for an simple access server.
> With the OID you provided me, Will show all the voip calls, incoming and
> outgoing?

I don't know. I use AS5300 with a MICA modems, but you have probably
installed
DSP cards. AS5300 is used like a gateway between VoIP (H.323 or SIP) and
PSTN
(ISDN PRI). You must try it. If it doesn't work, you must find other OIDs
in a MIB.

Best regards,


--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://lists.ee.ethz.ch/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://lists.ee.ethz.ch/lsg2.cgi