[mrtg] OIDs query not working from mrtg but working from command line
Toto Capuccino
shoktai at gmail.com
Tue Jun 5 17:14:09 CEST 2007
Ok after a few hours polling it is working now.
Do you guys know the OIDs for monitoring the Memory (available and used)?
I have also downloaded the informant software but i cant find those OIDs.
All i get is
snmpget -v 1 -c community hostname .1.3.6.1.2.1.25.2.2.0
HOST-RESOURCES-MIB::hrMemorySize.0 = INTEGER: 2096632 KBytes
2007/6/4, Toto Capuccino <shoktai at gmail.com>:
>
> Ok guys, thats a help, i managed to get rid of all errors but still i dont
> retrive values for OIDs.
> Here is my .cfg file:
> Target[10.2.1.3]:
> 1.3.6.1.4.1.9600.1.1.5.1.5.6.95.84.111.116.97.108&1.3.6.1.4.1.9600.1.1.5.1.5.6.95.84.111.116.97.108:press\@nyKey@
> 10.2.1.3:::::1
> Title[10.2.1.3]: Cpu Utilzation for nla03
> MaxBytes[10.2.1.3]: 100
> AbsMax[10.2.1.3]: 100
> PageTop[ 10.2.1.3]: CPU Utilization <h1>Cpu Utilization for Server</h1>
> Options[10.2.1.3]: gauge,growright,nopercent, noo
> YLegend[10.2.1.3]: CPU Utilization
> ShortLegend[10.2.1.3]: %
> LegendI[10.2.1.3]: CPU Utilization (percentage) 
>
> SingleRequest: Yes
> NoMib2: Yes
> LoadMIBs: /usr/share/snmp/mibs/HOST- RESOURCES-MIB.txt
> ,/usr/share/snmp/mibs/TCP-MIB.txt
> Workdir: /var/www/rem-servers
>
> I have tried OID supplied by Bob with no luck. When i run mrtg i dont get
> any error but if on the monitored server i increase cpu utilization it is
> not showing up on the graph.
>
> From the command line everything works fine though:
> snmpget -v 1 -c press at nyKey 10.2.1.3
> 1.3.6.1.4.1.9600.1.1.5.1.5.6.95.84.111.116.97.108
> SNMPv2-SMI::enterprises.9600.1.1.5.1.5.6.95.84.111.116.97.108 = Gauge32: 9
>
> snmpget -v 1 -c press at nyKey 10.2.1.3
> 1.3.6.1.4.1.9600.1.1.5.1.5.6.95.84.111.116.97.108
> SNMPv2-SMI::enterprises.9600.1.1.5.1.5.6.95.84.111.116.97.108 = Gauge32:
> 33
>
> I have ran mrtg with logging option and get :
> can't locate Socket6.pm in @INC
> 2007-06-04 19:41:54 -- Can't locate Socket6.pm in @INC (@INC contains:
> /usr/bin/../lib/mrtg2 /usr/bin /etc/perl /usr/local/lib/perl/5.8.8
> /usr/local/share/perl/5.8.8 /usr/lib/perl5 /usr/share/perl5
> /usr/lib/perl/5.8 /usr/share/perl/5.8 /usr/local/lib/site_perl .) at
> /usr/share/perl5/SNMP_Session.pm line 138.
>
> Any ideas?
>
> Thanks.
> 2007/6/4, Bob Grabbe <bgrabbe at umich.edu>:
> >
> > This is the paragraph I'm using, it does work on Server 2003. There is
> > a difference in the oid's for 2000 and 2003, I think. I do see a difference
> > between your oid and mine. I don't know if that's it, though.
> >
> >
> >
> >
> > Target[Server-cpu]:.1.3.6.1.4.1.311.1.1.3.1.1.33.9.0&.1.3.6.1.4.1.311.1.1.3.1.1.33.9.0:
> > public at Server
> >
> > AbsMax[Server-cpu]: 100
> >
> > MaxBytes[Server-cpu]: 100
> >
> > Title[Server-cpu]: CPU Utilization (average)
> >
> > PageTop[Server-cpu]: CPU Utilization <h1>Cpu Utilization for Server</h1>
> >
> > Options[Server-cpu]: gauge,growright,nopercent, noo
> >
> > YLegend[Server-cpu]: CPU Utilization
> >
> > ShortLegend[Server-cpu]: %
> >
> > LegendI[Server-cpu]: CPU Utilization (percentage) 
> >
> >
> >
> > Bob Grabbe
> >
> > Michigan Proteome Consortium
> >
> > University of Michigan
> >
> > bgrabbe at umich.edu
> >
> > _____________________________________________________________
> >
> > If we knew what we were doing, it wouldn't be called research, would it
> > ?
> >
> > --Albert Einstien
> >
> >
> >
> > *From:* mrtg-bounces at lists.oetiker.ch [mailto:mrtg-bounces at lists.oetiker.ch]
> > *On Behalf Of *Toto Capuccino
> > *Sent:* Monday, June 04, 2007 11:51 AM
> > *To:* mrtg at lists.oetiker.ch
> > *Subject:* [mrtg] OIDs query not working from mrtg but working from
> > command line
> >
> >
> >
> > Hi
> >
> > I just installed mrtg and i am reading the doc.
> > I would like to create a graph of CPU utilization of Windows 2003
> > server.
> > I have a simple OID to query:
> > 1.3.6.1.4.1.9600.1.1.5.1.5.6.95.84.111.116.97.108
> >
> > It works from the command line
> > snmpget -v 1 -c press at nyKey 10.2.1.3
> > 1.3.6.1.4.1.9600.1.1.5.1.5.6.95.84.111.116.97.108
> > SNMPv2-SMI::enterprises.9600.1.1.5.1.5.6.95.84.111.116.97.108 = Gauge32:
> > 0
> >
> > So i have started writing my cfg file
> > Target[10.2.1.3]:
> > 1.3.6.1.4.1.9600.1.1.5.1.5.6.95.84.111.116.97.108&1.3.6.1.4.1.9600.1.1.5.1.5.6.95.84.111.116.97.108:press\@nyKey
> > @ 10.2.1.3
> > Title[10.2.1.3]: Cpu Utilzation for nlamssv03
> > MaxBytes[10.2.1.3]: 100
> >
> > It doesn't work.
> >
> > I get this error :
> > env LANG=C /usr/bin/mrtg test2.cfg
> > SNMP Error:
> > Received SNMP response with error code
> > error status: noSuchName
> > index 2 (OID: 1.3.6.1.4.1.9600.1.1.5.6.95.84.111.116.97.108)
> > SNMPv1_Session (remote host: " 10.2.1.3" [10.2.1.3].161)
> > community: "press at nyKey"
> > request ID: 1534273303
> > PDU bufsize: 8000 bytes
> > timeout: 2s
> > retries: 5
> > backoff: 1)
> > at /usr/share/perl5/SNMP_util.pm line 490
> > SNMPGET Problem for 1.3.6.1.4.1.9600.1.1.5.1.5.6.95.84.111.116.97.108
> > 1.3.6.1.4.1.9600.1.1.5.6.95.84.111.116.97.108 sysUptime sysName on
> > press at nyKey@10.2.1.3::::::v4only
> > at /usr/bin/mrtg line 2043
> > 2007-06-04 17:12:59: ERROR: Target[10.2.1.3][_IN_] ' $target->[1]{$mode}
> > ' did not eval into defined data
> > 2007-06-04 17:12:59: ERROR: Target[10.2.1.3][_OUT_] '
> > $target->[1]{$mode} ' did not eval into defined data
> >
> >
> > I have also tried with another OIDs loading 2 MIBS
> > 1.3.6.1.2.1.25.3.3.1.2.1
> >
> > SNMP Error:
> > Received SNMP response with error code
> > error status: noSuchName
> > index 1 (OID: 1.3.6.1.2.1.25.3.3.1.2.1)
> > SNMPv1_Session (remote host: "10.2.1.3" [ 10.2.1.3].161)
> > community: "press at nyKey"
> > request ID: 707258015
> > PDU bufsize: 8000 bytes
> > timeout: 2s
> > retries: 5
> > backoff: 1)
> > at /usr/share/perl5/SNMP_util.pm line 490
> > SNMPGET Problem for .1.3.6.1.2.1.25.3.3.1.2.1 .1.3.6.1.2.1.25.3.3.1.2.1
> > sysUptime sysName on press at nyKey@10.2.1.3::::::v4only
> > at /usr/bin/mrtg line 2043
> > 2007-06-04 17:16:10: ERROR: Target[10.2.1.3][_IN_] '(
> > $target->[1]{$mode} ) \ 1' (warn): (Missing operator before \?)
> > 2007-06-04 17:16:10: ERROR: Target[ 10.2.1.3][_OUT_] '(
> > $target->[1]{$mode} ) \ 1' (warn): (Missing operator before \?)
> >
> > Can you help?
> >
> > Thanks
> >
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.oetiker.ch/pipermail/mrtg/attachments/20070605/6f3b4a6a/attachment-0001.html
More information about the mrtg
mailing list