[mrtg] Graphs from 1 server, but not 3 identical servers

Koelstra, J. (Jan) JKoelstra at MINSZW.NL
Fri Mar 9 12:12:19 CET 2007


The timestamps of the first lines in the two logfiles are 36786 seconds apart. In a 5 minute run cycle they should be (about) 300 seconds apart.
First you should find an explanation for this big time gap.
If the 10+ hour timegap is right then it is normal that there are zero's in the graphs:
The first counter increases only by 1922. This results in a rate of less then 1 per second, and will give a 0 in your log and graph. The second counter increases even less.
To graph such a slow increasing counter you probably need the perminute or perhour option.



	-----Original Message-----
	From: mrtg-bounces at lists.oetiker.ch [mailto:mrtg-bounces at lists.oetiker.ch] On Behalf Of Stuart Marsden
	Sent: Friday, March 09, 2007 9:49 AM
	Cc: mrtg at lists.oetiker.ch
	Subject: Re: [mrtg] Graphs from 1 server, but not 3 identical servers

	Hi Alex

	Thanks for your patience.

	> > Rateup is working for thousands, if not millions, of users.
	> > Excuse me for not believing you right away.

	Sorry - What I meant was that the secret to what I am doing wrong is within Rateup,
	I have loads of other graphs which work fine

	> > MaxBytes or, if you need two different rates, MaxBytes1 and MaxBytes2.
	> > Not that I think this is a problem

	I have gone back to my original of just MaxBytes

	> > Please don't make me debug logfiles.  Show the top line of one (not more)
	> > of the non-functional setups, for a couple of consecutive updates.

	These are two consecutive runs on my test server to isolate this problem
	(Normally run on 5 min cron )
	1173392418 170961 269
	1173392418 0 0 0 0
	1173390174 0 0 0 0
	1173390000 0 0 0 0

	1173429204 172883 274
	1173429204 0 0 0 0
	1173392418 0 0 0 0



Dit bericht kan informatie bevatten die niet voor u is bestemd. Indien u niet de geadresseerde bent of dit bericht abusievelijk aan u is toegezonden, wordt u verzocht dat aan de afzender te melden en het bericht te verwijderen. De staat aanvaardt geen aansprakelijkheid voor schade, van welke aard ook, die verband houdt met risico's verbonden aan het elektronisch verzenden van berichten.

This message may contain information that is not intended for you. If you are not the addressee or if this message was sent to you by mistake, you are requested to inform the sender and delete the message. The state accepts no liability for damage of any kind resulting from the risks inherent in the electronic transmission of messages.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.oetiker.ch/pipermail/mrtg/attachments/20070309/bbce705b/attachment.html 

More information about the mrtg mailing list