[mrtg] MRTG not graphing data

[Mersberger, Robert]

 If there is no change in the counter the delta will always be zero and
thus flatline.  If the delta changes due to errors being reported on the
interface you should see a change.  

-----Original Message-----
From: mrtg-bounces at lists.oetiker.ch
[mailto:mrtg-bounces at lists.oetiker.ch] On Behalf Of Ron Gage
Sent: Wednesday, May 02, 2007 12:37 PM
To: Brian A. Seklecki
Cc: mrtg at lists.oetiker.ch
Subject: Re: [mrtg] MRTG not graphing data

Results are in:  no difference.  Still not graphing data.

_____________________________________
Ron Gage
Sr IT Infrastructure Specialist
Altiris
Now Part of Symantec
www.symantec.com/altiris
_____________________________________

Office: +1 734 456 2202
Mobile: +1 248 343 2431
_____________________________________ 


-----Original Message-----
From: Brian A. Seklecki [mailto:lavalamp at spiritual-machines.org]
Sent: Wednesday, May 02, 2007 1:08 PM
To: Ron Gage
Cc: mrtg at lists.oetiker.ch
Subject: Re: [mrtg] MRTG not graphing data


This is a very slowly incrementing counter.  Try options perminute?

On Wed, 2 May 2007, Ron Gage wrote:

> I am running MRTG to log error hits on our T1's here - or at least
that
> is what I am trying to do.
>
>
>
> The log file shows the most recent SNMP get value on the top line, but
> (other than the timestamps), the other lines are all showing zero's.
>
>
>
> Relevant snippet from the cfg file:
>
>
>
> Target[plym-8xds1_1]: ifInErrors.1&ifOutErrors.1:altaris at plym-8xds1
>
> SetEnv[plym-8xds1_1]: MRTG_INT_IP="" MRTG_INT_DESCR="T1 1/1 Errors"
>
> MaxBytes[plym-8xds1_1]: 100
>
> Title[plym-8xds1_1]: Plymouth 8xds1 line 1 error counts
>
> PageTop[plym-8xds1_1]: <H1>plym-8xds1 error counts</H1>
>
> <TABLE>
>
>   <TR><TD>System:</TD>     <TD>plym-8xds1</TD></TR>
>
>   <TR><TD>Maintainer:</TD> <TD>Ron Gage</TD></TR>
>
>   <TR><TD>Description:</TD><TD>T1 1/1  </TD></TR>
>
>   <TR><TD>ifType:</TD>     <TD>ppp (23)</TD></TR>
>
>   <TR><TD>ifName:</TD>     <TD>t1 1/1</TD></TR>
>
>   <TR><TD>Max Speed:</TD>  <TD>10 errors</TD></TR>
>
> </TABLE>
>
>
>
> I can do an SNMPGET and/or SNMPWALK from the same server and can see
the
> values there.
>
>
>
> The graphs being generated from MRTG show absolutely no data
whatsoever
> (flatline), even though separate monitoring is showing some of these
> counters increasing on occasion.
>
>
>
> HELP!
>
>
>
> _____________________________________
> Ron Gage
> Sr IT Infrastructure Specialist
>
> Altiris
> Now Part of Symantec
> www.symantec.com/altiris
> _____________________________________
>
> Office: +1 734 456 2202
> Mobile: +1 248 343 2431
> _____________________________________
>
>
>
>

l8*
 	-lava (Brian A. Seklecki - Pittsburgh, PA, USA)
 	       http://www.spiritual-machines.org/

"...from back in the heady days when "helpdesk" meant nothing,
"diskquota"
meant everything, and lives could be bought and sold for a couple of
pages
of laser printout - and frequently were."

_______________________________________________
mrtg mailing list
mrtg at lists.oetiker.ch
https://lists.oetiker.ch/cgi-bin/listinfo/mrtg


CONFIDENTIAL NOTICE:
This e-mail message and any attachment(s) (collectively, this 'Email') are intended
only for the confidential use of the recipient(s) named above. If the reader of this
message is not the intended recipient named above or an agent responsible for
delivering it to the intended recipient named above, you have received this Email in error.
Please notify the sender immediately and permanently delete this Email and any copies thereof.