[mrtg] Monitor TenGiga ports

[Geba, Scott]

Store it with RRD and using 14-all.cgi

 

Did you rediscover the 10G ports after you upgraded?

 

 

________________________________

From: Mizrahi, Gil [mailto:gil.mizrahi at intel.com] 
Sent: Thursday, May 10, 2007 10:16 AM
To: Geba, Scott; Mersberger, Robert; mrtg at lists.oetiker.ch
Subject: RE: [mrtg] Monitor TenGiga ports

 

Yes I am using the 64bit counters. Example
password at Some_Device_Name:::::2. 

How you store the data? As MRTG gif or as .rrd file? What front-end are
you using? 

 

 

________________________________

From: Geba, Scott [mailto:Scott_Geba at cable.comcast.com] 
Sent: Thursday, May 10, 2007 5:05 PM
To: Mizrahi, Gil; Mersberger, Robert; mrtg at lists.oetiker.ch
Subject: RE: [mrtg] Monitor TenGiga ports

 

I'm monitoring 3x10G port channels with traffic consistently around
15-20G as well as 4-5G on single 10G's.

 

Are you using the 64bit counters? public at 1.1.1.1:::::2      Something
like that? You need to use that in order to get the 10G 

 

What are you using for your cfgmaker commands? 

 

________________________________

From: Mizrahi, Gil [mailto:gil.mizrahi at intel.com] 
Sent: Thursday, May 10, 2007 9:57 AM
To: Mizrahi, Gil; Mersberger, Robert; Geba, Scott; mrtg at lists.oetiker.ch
Subject: RE: [mrtg] Monitor TenGiga ports

 

Hi guys,

It took me sometime, I upgraded to mrtg-2.15.2 and I still get 100%
bandwidth of 4.19 Gbps.

1 more thing, when you say you collect with "no problems", did you
really saw traffic over 4 Gbps?

 

Thanks,

Gil.

 

________________________________

From: mrtg-bounces at lists.oetiker.ch
[mailto:mrtg-bounces at lists.oetiker.ch] On Behalf Of Mizrahi, Gil
Sent: Tuesday, March 27, 2007 10:37 PM
To: Mersberger, Robert; Geba, Scott; mrtg at lists.oetiker.ch
Subject: Re: [mrtg] Monitor TenGiga ports

 

Hi,

I am using version 2.11.1. I will try to upgrade and see what happens.

 

Thanks to all for your answers,

Gil.

 

________________________________

From: Mersberger, Robert [mailto:robert.mersberger at goldenven.com] 
Sent: Tuesday, March 27, 2007 3:27 PM
To: Geba, Scott; Mizrahi, Gil; mrtg at lists.oetiker.ch
Subject: RE: [mrtg] Monitor TenGiga ports

 

We are running 10gig switches on our 4 6513's and using mrtg 2.17 have
seen no problems 

 

________________________________

From: mrtg-bounces at lists.oetiker.ch
[mailto:mrtg-bounces at lists.oetiker.ch] On Behalf Of Geba, Scott
Sent: Tuesday, March 27, 2007 7:55 AM
To: Mizrahi, Gil; mrtg at lists.oetiker.ch
Subject: Re: [mrtg] Monitor TenGiga ports

Which version of MRTG are you running? I had a similar problem but when
I upgraded to the latest MRTG it started discovering them all as 10G
ports and have been monitoring a few hundred of them for a few months
now. 

 

________________________________

From: mrtg-bounces at lists.oetiker.ch
[mailto:mrtg-bounces at lists.oetiker.ch] On Behalf Of Mizrahi, Gil
Sent: Tuesday, March 27, 2007 8:46 AM
To: mrtg at lists.oetiker.ch
Subject: [mrtg] Monitor TenGiga ports

 

Hello,

I monitor TenGiga ports on Cisco routers (6506/9) with MRTG using 64-bit
counters (:::::2).

As I understand 64-bit counters can fit 10 Giga bit, nevertheless the
max bandwidth shown is ~4Gbps.

Why is that? Or what am I missing?

 

 

Thanks,

Gil.

 

CONFIDENTIAL NOTICE:
This e-mail message and any attachment(s) (collectively, this 'Email')
are intended 
only for the confidential use of the recipient(s) named above. If the
reader of this 
message is not the intended recipient named above or an agent
responsible for 
delivering it to the intended recipient named above, you have received
this Email in error. 
Please notify the sender immediately and permanently delete this Email
and any copies thereof.

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.oetiker.ch/pipermail/mrtg/attachments/20070510/db751da5/attachment-0001.htm