[mrtg] graphing an OID

[Klaus Bruno]

Hi

all my working checks with OID's are starting without the . before the
OID

e.g.
Target[OutsideTemp]:
1.3.6.1.4.1.16174.1.1.3.3.1.3.0&1.3.6.1.4.1.16174.1.1.3.3.1.3.0:#####@1.
1.12.250

br
Bruce 

- -----Original Message-----
- From: mrtg-bounces at lists.oetiker.ch 
- [mailto:mrtg-bounces at lists.oetiker.ch] On Behalf Of Dylan Bouterse
- Sent: Wednesday, October 17, 2007 5:54 PM
- To: Anson Rinesmith; mrtg at lists.oetiker.ch
- Subject: Re: [mrtg] graphing an OID
- 
- It is still not returning a value.
- 
- -----Original Message-----
- From: Anson Rinesmith [mailto:arinesmith at bigrivertelephone.com] 
- Sent: Wednesday, October 17, 2007 11:44 AM
- To: Dylan Bouterse; mrtg at lists.oetiker.ch
- Subject: RE: [mrtg] graphing an OID
- 
- try removing the leading .
- 
- -----Original Message-----
- From: mrtg-bounces at lists.oetiker.ch
- [mailto:mrtg-bounces at lists.oetiker.ch]
- On Behalf Of Dylan Bouterse
- Sent: Wednesday, October 17, 2007 10:25 AM
- To: mrtg at lists.oetiker.ch
- Subject: [mrtg] graphing an OID
- 
- I am not able to turn an snmpget command that works into a working
- graph. I'm sure there is a relatively simple answer/fix to what I am
- doing wrong. SNMPGET returns:
- 
- [root at ns1 cfg]# snmpget -v 1 -c ##### 1.1.12.250
- .1.3.6.1.4.1.16174.1.1.3.3.1.3.0
- SNMPv2-SMI::enterprises.16174.1.1.3.3.1.3.0 = STRING: "80.5"
- 
- In my MRTG config I have:
- 
- Target[OutsideTemp]:
- .1.3.6.1.4.1.16174.1.1.3.3.1.3.0&.1.3.6.1.4.1.16174.1.1.3.3.1.
3.0:#####@
- 1.1.12.250
- 
- I can also change the 1.3.0 to 1.4.0 to get an INTERGER but 
- I'm not sure
- that matters with my issue. Any help?
- 
- Dylan
- 
- _______________________________________________
- mrtg mailing list
- mrtg at lists.oetiker.ch
- https://lists.oetiker.ch/cgi-bin/listinfo/mrtg
- 
- _______________________________________________
- mrtg mailing list
- mrtg at lists.oetiker.ch
- https://lists.oetiker.ch/cgi-bin/listinfo/mrtg
-