[mrtg] SNMPv3 with MRTG

[Crazy]

When i start mrtg, some errors are showed... and no graphs are created.
But with snmpwalk and cfgmaker it works.


server$: mrtg mrtg.cfg
2008-06-23 13:12:28: WARNING: Expected a number but got 'noSuchObject'
2008-06-23 13:12:28: WARNING: Expected a number but got 'noSuchObject'
2008-06-23 13:12:28: ERROR: Target[192.168.2.254_2][_IN_] ' 
$target->[0]{$mode} ' did not eval into defined data
2008-06-23 13:12:28: ERROR: Target[192.168.2.254_2][_OUT_] ' 
$target->[0]{$mode} ' did not eval into defined data



My Conf file 'mrtg.cfg'
---->
enablesnmpv3: yes
EnableIPv6: no
WorkDir: /home/mrtg
Options[192.168.2.254_2]: growright, bits

Target[192.168.2.254_2]: 2:test at 192.168.2.254:::::3
SnmpOptions[192.168.2.254_2]: 
authpassword=>'testpass',authprotocol=>'md5',username=>'test',contextengineid=>'800007e58094168a2201e96048'
SetEnv[192.168.2.254_2]: MRTG_INT_IP="" MRTG_INT_DESCR="eth0"
MaxBytes[192.168.2.254_2]: 32
Title[192.168.2.254_2]: Traffic Analysis for 1
PageTop[192.168.2.254_2]: <h1>Traffic Analysis for 1</h1>
<----