[mrtg] Voice Calls Help

[Frank Misak]

Hi Eric,

	I found that in the docs for mrtg 2.16.  I tried it since the
values I get from the snmpwalk are not integers, I need the number of
lines returned:

Counted SNMP Walk

    In other situations, an snmpwalk is needed to count rows, but the
actual data is uninteresting. For example, counting the number of
mac-addresses in a CAM table, or the number of simultaneous dialup
sessions. You can get MRTG to count the number of instances by
prepending the OID with the string CnTWaLK. The following will retrieve
the number of simultaneous VOIP calls on some routers:

    Example:

       Target[myrouter]:
CnTWaLK1.3.6.1.4.1.9.10.55.1.1.1.1.3&CnTWaLK1.3.6.1.4.1.9.10.55.1.1.1.1.
3:public at myrouter

But not working right...



-----Original Message-----
From: mrtg-bounces at lists.oetiker.ch
[mailto:mrtg-bounces at lists.oetiker.ch] On Behalf Of Eric Brander
Sent: Monday, May 19, 2008 3:57 PM
To: mrtg at lists.oetiker.ch
Subject: Re: [mrtg] Voice Calls Help

On Mon, May 19, 2008 at 1:42 PM, Frank Misak
<Frank.Misak at mpiresearch.com> wrote:

>
> Target[NODE_IP_calls]:
>
CnTWaLK1.3.6.1.4.1.9.9.63.1.3.1.1.1&CnTWaLK1.3.6.1.4.1.9.9.63.1.3.1.1.1:
<READSTRING>@<NODEIP>:
>


What is "CnTWaLK"? Those should not be there. Might not be your only
problem but it's a start.

HTH,

Eric Brander

_______________________________________________
mrtg mailing list
mrtg at lists.oetiker.ch
https://lists.oetiker.ch/cgi-bin/listinfo/mrtg
This communication, including attachments, is for the exclusive use of addressee and 
may contain proprietary, confidential and/or privileged information. If you are not 
the intended recipient, any use, copying, disclosure, dissemination or distribution 
is strictly prohibited. If you are not the intended recipient, please notify the sender 
immediately by return e-mail, delete this communication and destroy all copies.