[mrtg] MRTG and blank cpu graphs...........please help

[nangineni praneeth]

Thanks a lot for your help.........Yes i did try your suggestion by appending 0 at the end and it was giving out errors like

Target[graham][_IN_] did not eval into defined data
Target[graham][_out_]did not eval into defined data

Yet
its creating the graphs but with no data...........I cant understand
what mistake i did.......If the cpu OID is wrong....then i did monitor
a cisco 2811 series router but the graphs were blank too.........Do i need to add any code to my cfg file and i am inserting my cpu load config at the end of cfg file..........I am using a windows xp machine with only one processor

Regards
Venkat........

--- On Tue, 11/18/08, Steve Shipway <s.shipway at auckland.ac.nz> wrote:
From: Steve Shipway <s.shipway at auckland.ac.nz>
Subject: RE: [mrtg] MRTG and blank cpu graphs...........please help
To: "'nv_2030 at yahoo.com'" <nv_2030 at yahoo.com>, "'mrtg at lists.oetiker.ch'" <mrtg at lists.oetiker.ch>
Date: Tuesday, November 18, 2008, 10:16 AM




 
 







Are you sure the OID is correct?  It
is possible that you should be using: 

   

Target[graham]:1.3.6.1.2.1.25.3.3.1.2.0&1.3.6.1.2.1.25.3.3.1.2.0:public at 192.168.2.10 

   

Often you need the .0 suffix to the OID.  Check your MRTG output
when it runs – do you get any SNMP errors? 

   

Steve 

   














 
  
  From:
  mrtg-bounces at lists.oetiker.ch [mailto:mrtg-bounces at lists.oetiker.ch] On Behalf Of nangineni praneeth

  

  Hello everyon...I am a complete newbie to mrtg............I was able to
  monitor the interface statistics..........I wanted to the monitor the cpu
  load on a windows xp machine.........MRTG could draw the graphs but the
  graphs were blank.......the average cpu utilization and maximum and current
  cpu utilization shows a value of zero...........

  

  This is cfg file i used for cpu

  

  Target[graham]:1.3.6.1.2.1.25.3.3.1.2&1.3.6.1.2.1.25.3.3.1.2:public at 192.168.2.10

  

   
  
 


   





 




      
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.oetiker.ch/pipermail/mrtg/attachments/20081117/ad98dfc5/attachment.html