[mrtg] having trouble with OID for cisco 6509 switch

[Benedict simon]

> This is what I use on my 6513's and it should also work on the 6509
> 1.3.6.1.4.1.9.2.1.58.0&1.3.6.1.4.1.9.2.1.58.0:community at ipaddr::2:2::2
>
> Try this with snmpget to verify values
>
> also your first target has two different OID's
i have the 2 oids since i was jus try out options
----

I tried with the above OIDs but the problem pesists
i also get the following messages on my MRTG machine
SNMP Error:
no response received
SNMPv1_Session (remote host: "10.10.10.3" [10.10.10.3].161)
                  community: "public"
                 request ID: 2121171415
                PDU bufsize: 8000 bytes
                    timeout: 2s
                    retries: 5
                    backoff: 1)
 at C:/mrtg-2.16.2/bin\..\lib\mrtg2/SNMP_util.pm line 492
SNMPGET Problem for 1.3.6.1.4.1.9.2.1.58.0 1.3.6.1.4.1.9.2.1.58.0
sysUptime sysN
ame on public at 10.10.10.3::::::v4only
 at mrtg line 2202
2009-04-30 23:18:30: WARNING: skipping because at least the query for
1.3.6.1.4.
1.9.2.1.58.0 on  10.10.10.3 did not succeed
2009-04-30 23:18:30: WARNING: no data for
1.3.6.1.4.1.9.2.1.58&1.3.6.1.4.1.9.2.1
.58:public at 10.10.10.3. Skipping further queries for Host 10.10.10.3 in
this roun
d.
2009-04-30 23:18:40: ERROR: Target[cpu.3][_IN_] ' $target->[88]{$mode} '
did not
 eval into defined data
2009-04-30 23:18:40: ERROR: Target[cpu.3][_OUT_] ' $target->[88]{$mode} '
did no
t eval into defined data

also more details of my core switch
IOS (tm) MSFC2 Software (C6MSFC2-JO3SV-M), Version 12.1(13)E3,
EARLEPLOYMENT RELEASE SOFTWARE (fc1)
 TAC Support: http://www.cisco.com/tac
 Copyright (c) 1986-2002 by cisco Systems, Inc.
Compiled Sat 21-D

apprecite any help


regards

simon


>
>
> -----Original Message-----
> From: mrtg-bounces at lists.oetiker.ch [mailto:mrtg-bounces at lists.oetiker.ch]
> On Behalf Of Benedict simon
> Sent: Thursday, April 30, 2009 10:55 AM
> To: mrtg at lists.oetiker.ch
> Subject: [mrtg] having trouble with OID for cisco 6509 switch
>
> Dear All,
>
> I am sucessfully installed Mrtg and been working fine.
> i am also monitoring CPU load for 2800 and 3700 router but i do have a
> problem monitoring the CPU load on my CISCO 6509 ciscoIOS MSFC
>
> I have tried using the following OIDs but it does not work
>
> Target[cpu.3]:1.3.6.1.4.1.9.2.1.57.0&1.3.6.1.4.1.9.2.1.58.0:public at ipadd
> Target[cpu.3]:1.3.6.1.4.1.9.9.109.1.1.1.1.5&.1.3.6.1.4.1.9.9.109.1.1.1.1.5:public at ipaddr
>
> but the graph is always 0
>
> does anybody have OIDS for cisco 6509 cisco IOS switch
>
> apprecite your help
>
>
> -
> Network ADMIN
> -------------
> KUWAIT MUNICIPALITY:
>
> --
> This message has been scanned for viruses and dangerous content by
> MailScanner, and is believed to be clean.
>
>
>
> Please consider the environment before printing this e-mail.
>
> CONFIDENTIAL NOTICE:
> This e-mail message and any attachment(s) (collectively, this 'Email') are
> intended
> only for the confidential use of the recipient(s) named above. If the
> reader of this
> message is not the intended recipient named above or an agent responsible
> for
> delivering it to the intended recipient named above, you have received
> this Email in error.
> Please notify the sender immediately and permanently delete this Email and
> any copies thereof.
>
> --
> This message has been scanned for viruses and
> dangerous content by MailScanner, and is
> believed to be clean.
>
>


-- 
Network ADMIN
-------------
KUWAIT MUNICIPALITY:

-- 
This message has been scanned for viruses and
dangerous content by MailScanner, and is
believed to be clean.