[mrtg] mrtg nosuchname

[gping]

i am cofiguring a cisco switch port graphs, some ports show as below in
xxx.cfg

### Interface 526712832 >> Descr: 'Ethernet102/1/1' | Name:
'Ethernet102/1/1' | Ip: '' | Eth: '00-0d-ec-d5-8b-42' ###
### The following interface is commented out because:
### * got 'Received SNMP response with error code
###       error status: noSuchName
###       index 1 (OID: 1.3.6.1.2.1.2.2.1.10.526712832)
###     SNMPv1_Session (remote host: "1.1.1.1" [1.1.1.1].161)
###                       community: "public"
###                      request ID: 1649262954
###                     PDU bufsize: 8000 bytes
###                         timeout: 2s
###                         retries: 5
###                         backoff: 1)' from interface when trying to query
# 
# Target[1.1.1.1_526712832]: 526712832:public at 1.1.1.1:
# SetEnv[1.1.1.1_526712832]: MRTG_INT_IP="" MRTG_INT_DESCR="Ethernet102/1/1"
# MaxBytes[1.1.1.1_526712832]: 125000000
# Title[1.1.1.1_526712832]: Traffic Analysis for 526712832 -SW
# PageTop[1.1.1.1_526712832]: <H1>Traffic Analysis for 526712832 -SW</H1>
#  <TABLE>
#    <TR><TD>System:</TD>     <TD></TD></TR>
#    <TR><TD>Maintainer:</TD> <TD></TD></TR>
#    <TR><TD>Description:</TD><TD>Ethernet102/1/1  </TD></TR>
#    <TR><TD>ifType:</TD>     <TD>ethernetCsmacd (6)</TD></TR>
#    <TR><TD>ifName:</TD>     <TD>Ethernet102/1/1</TD></TR>
#    <TR><TD>Max Speed:</TD>  <TD>125.0 MBytes/s</TD></TR>
#  </TABLE>

when i run mrtg on the below config,
Target[1.1.1.1_526712832]: 526712832:public at 1.1.1.1:
SetEnv[1.1.1.1_526712832]: MRTG_INT_IP="" MRTG_INT_DESCR="Ethernet102/1/1"
MaxBytes[1.1.1.1_526712832]: 125000000
Title[1.1.1.1_526712832]: Traffic Analysis for 526712832 -SW
PageTop[1.1.1.1_526712832]: <H1>Traffic Analysis for 526712832 -SW</H1>
 <TABLE>
   <TR><TD>System:</TD>     <TD></TD></TR>
   <TR><TD>Maintainer:</TD> <TD></TD></TR>
   <TR><TD>Description:</TD><TD>Ethernet102/1/1  </TD></TR>
   <TR><TD>ifType:</TD>     <TD>ethernetCsmacd (6)</TD></TR>
   <TR><TD>ifName:</TD>     <TD>Ethernet102/1/1</TD></TR>
   <TR><TD>Max Speed:</TD>  <TD>125.0 MBytes/s</TD></TR>
 </TABLE>

i got error message like:

Received SNMP response with error code
  error status: noSuchName
  index 2 (OID: 1.3.6.1.2.1.2.2.1.16.526712896)
SNMPv1_Session (remote host: "1.1.1.1" [1.1.1.1].161)
                  community: "public"
                 request ID: 389519874
                PDU bufsize: 8000 bytes
                    timeout: 2s
                    retries: 5
                    backoff: 1)
 at /usr/bin/../lib/mrtg2/SNMP_util.pm line 490
SNMPGET Problem for ifInOctets.526712896 ifOutOctets.526712896 sysUptime
sysName on public at 1.1.1.1::::::v4only
 at /usr/bin/mrtg line 1851
ERROR: Target[1.1.1.1_526712896][_IN_] ' $target->[0]{$mode} ' did not eval
into defined data
ERROR: Target[1.1.1.1_526712896][_OUT_] ' $target->[0]{$mode} ' did not eval
into defined data

i have searched lots on internet, could not find a resolution.

could someone PLEASE help. Thanks and thanks.


-- 
View this message in context: http://n2.nabble.com/mrtg-nosuchname-tp3870171p3870171.html
Sent from the MRTG Users Mailinglist mailing list archive at Nabble.com.