[mrtg] Fw: graphing cisco virtual interface/PPPoE users

[Anubhav.Katiyar at Airtel.in]

Dear  Sir 

Currently we are working on the MRTG ,  i have to integrate MRTG with RRD 
tool , and i have downloaded the tool and installed on my Linux , however 
i unable to do the necessary 
 Changes ,what i have to do the changes in the configuration file .

As a sample i am sending you my Current Configuration file for MRTG , 
please support us in implemting RRD files . 

WorkDir: /home/www/mrtg/north1
RunAsDaemon: Yes
Options[_]: growright, bits
WithPeak[_]: ymw

Directory[spatial-3656-nod]:spatial-3656-nod
Target[spatial-3656-nod]: -\Serial1/0.1/1/5/2\:0:qh$\@kl at 203.101.87.175:
MaxBytes[spatial-3656-nod]:256000
Title[spatial-3656-nod]:Traffic Analysis for SPATIAL COMMUNICATIONS INDIA 
PVT LTD.
PageTop[spatial-3656-nod]: <H1>Traffic Analysis for SPATIAL COMMUNICATIONS 
INDIA PVT LTD.</H1>
 <TABLE>
   <TR><TD>Max Speed:</TD>  <TD>2048 Kbps</TD></TR>
   <TR><TD>Port at Router/Switch:</TD> 
<TD>\Serial1/0.1/1/5/2\:0:@NOD-ISP-COR-RTR-175</TD></TR>
   <TR><TD>Wan Ip:</TD>  <TD>61.246.184.225</TD></TR>
 </TABLE>


Regards
Anubhav Katiyar 
System Engineer (Data Center Operation) 
Handphone  +91 9871258392





Steve Shipway <s.shipway at auckland.ac.nz> 
Sent by: mrtg-bounces+anubhav.katiyar=airtel.in at lists.oetiker.ch
04/06/2010 01:52 PM

To
Khemara Lyn <lin.kh at wicam.com.kh>, "mrtg at lists.oetiker.ch" 
<mrtg at lists.oetiker.ch>
cc

Subject
Re: [mrtg] graphing cisco virtual interface/PPPoE users
         P  Please do not print this e-mail unless it is absolutely 
necessary P





You will need to write it yourself!  As far as I know, noone has yet 
produced such a plugin.  Instructions for how to write a MRTG data 
collection plugin are available on the MRTG website -- basically, it needs 
to
(a) exit with status 0, and
(b) output two numbers in the form "xxxxx\nyyyyy\n\n\n"  where xxxx and 
yyyy are the In and Out components respectively (or U for unknown)
You can write it in any language (I prefer Perl but its up to you). You've 
already shown you can write shellscript so maybe that's the one for you to 
use?

Steve

________________________________________
From: Khemara Lyn [lin.kh at wicam.com.kh]
...
Thanks for your insightful comments. I agree that, the plugin would be a
more suitable solution. May I know where I can get the plugin and how to
get it to work?
_______________________________________________
mrtg mailing list
mrtg at lists.oetiker.ch
https://lists.oetiker.ch/cgi-bin/listinfo/mrtg


This e-mail and any files transmitted with it are for the sole use of the intended recipient(s) and may contain confidential and privileged information. If you are not the intended recipient, please contact the sender by reply e-mail and destroy all copies and the original message. Any unauthorized review, use, disclosure,dissemination, forwarding, printing or copying of this email or any action taken in reliance on this e-mail is strictly prohibited and may be unlawful.
The recipient acknowledges that Bharti Airtel Limited or its subsidiaries and associated companies(collectively "Bharti Airtel Limited"),are unable to exercise control or ensure or guarantee the integrity of/overthe contents of the information contained in e-mail transmissions and further acknowledges that any views expressed in this message are those of the individual sender and no binding nature of the message shall be implied or assumed unless the sender does so expressly with due authority of Bharti Airtel Limited. Before opening any attachments please check them for viruses and defects.

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.oetiker.ch/pipermail/mrtg/attachments/20100406/770ef566/attachment-0001.htm