[mrtg] SOLVED. Re: SNMP Error

[Joakim Cefalk]

I solved the problem it was an issue with the access rights.

Joakim Cefalk skrev 2010-08-08 12:28:
> Hello.
>
> When I am running the "mrtg /home/joakim//www/mrtg/mrtg.cfg" i get the
> following error.
> Is there enything I have to add under the view section in the snmpd.conf
> file?
>
> SNMP Error:
> Received SNMP response with error code
>     error status: noSuchName
>     index 2 (OID: 1.3.6.1.2.1.2.2.1.16.1)
> SNMPv1_Session (remote host: "localhost" [127.0.0.1].161)
>                     community: "public"
>                    request ID: 341198038
>                   PDU bufsize: 8000 bytes
>                       timeout: 2s
>                       retries: 5
>                       backoff: 1)
>    at /usr/bin/../lib/mrtg2/SNMP_util.pm line 490
> SNMPGET Problem for ifInOctets.1 ifOutOctets.1 sysUptime sysName on
> public at localhost::::::v4only
>    at /usr/bin/mrtg line 2150
> 2010-08-08 12:17:11: ERROR: Target[eth1][_IN_] ' $target->[0]{$mode} '
> did not eval into defined data
> 2010-08-08 12:17:11: ERROR: Target[eth1][_OUT_] ' $target->[0]{$mode} '
> did not eval into defined data
>
> Best regards
>
> Joakim Cefalk
>
> _______________________________________________
> mrtg mailing list
> mrtg at lists.oetiker.ch
> https://lists.oetiker.ch/cgi-bin/listinfo/mrtg
>