[mrtg] mrtg snmp problem

[Tobias Dinse]

Hi @all,

I ve tried to config MRTG to get the number of all connected calls from our telephone system (patton smartnode) over SNMP. I generated a config file by using

cfgmaker --global "WorkDir: /var/www/mrtg" --output /etc/mrtg/isdn_zaehler.cfg public at 192.168.110.162

I opened isdn_zaehler.cfg and did some changes. Here is the actual configfile:


#  for UNIX
# WorkDir: /home/http/mrtg

#  for Debian
WorkDir: /var/www/mrtg

#  or for NT
# WorkDir: c:\mrtgdata

### Global Defaults

#  to get bits instead of bytes and graphs growing to the right
# Options[_]: growright, bits

EnableIPv6: no
WorkDir: /var/www/mrtg


Target[sn4552isdncounter]: 1.3.6.1.4.1.1768.100.70.40.2.1.2.2&1.3.6.1.4.1.1768.100.70.40.2.1.2.2:public at 192.168.110.162

# SetEnv[sn4552isdncounter]: MRTG_INT_IP="" MRTG_INT_DESCR="ethernet-0-0-1"

MaxBytes[sn4552isdncounter]: 2

Title[sn4552isdncounter]: ISDN Channels 

PageTop[sn4552isdncounter]: <h1>active ISDN Channels </h1>
               <div id="sysdetails">
                       <table>
                               <tr>
                                       <td>System:</td>
                                       <td>Buero</td>
                               </tr>
                               <tr>
                                       <td>Maintainer:</td>
                                       <td>techrole at xxx.de</td>
                               </tr>
                               <tr>
                                       <td>Description:</td>
                                       <td>SNMP ISDN Counter  </td>
                               </tr>
                               <tr>
                                       <td>ifType:</td>
                                       <td>ISDN Bri Channel Counter</td>
                               </tr>
                               <tr>
                                       <td>ifName:</td>
                                       <td></td>
                               </tr>
                 <tr>
                                       <td>Max Speed:</td>
                                       <td>2 Channels</td>
                               </tr>
                       </table>
               </div>

If i browse to http://localhost/mrtg i can see some graphics but there are always the same. Cron entry is set and work. Running mrtg with isdn_zaehler.cfg shows no errors. I hope there is an error in the cfg file and someone can help me

thanks & cu

Tobias D.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.oetiker.ch/pipermail/mrtg/attachments/20101228/686f19e7/attachment.htm