[mrtg] mrtg graph help

Sivakumar Natarajan Sivakumar.Natarajan at necindia.in
Thu Feb 4 07:42:04 CET 2010


Hi,

I can't understand, please find below my mrtg.cfg file where should I
update?

# Created by 
# cfgmaker public at 172.30.49.129 --global "WorkDir: c:\www\mrtg" --output
mrtg.cfg


### Global Config Options

#  for UNIX
# WorkDir: /home/http/mrtg

#  or for NT
# WorkDir: c:\mrtgdata

### Global Defaults

#  to get bits instead of bytes and graphs growing to the right
# Options[_]: growright, bits

EnableIPv6: no

######################################################################
# System: NEC_Chennai.yourdomain.com
# Description: Cisco IOS Software, 1841 Software (C1841-IPBASE-M),
Version 12.4(1c), RELEASE SOFTWARE (fc1)
#          Technical Support: http://www.cisco.com/techsupport
#          Copyright (c) 1986-2005 by Cisco Systems, Inc.
#          Compiled Tue 25-Oct-05 17:10 by evmiller
# Contact: 
# Location: 
######################################################################


### Interface 1 >> Descr: 'FastEthernet0/0' | Name: 'Fa0/0' | Ip:
'172.30.49.129' | Eth: '00-1b-53-ae-12-38' ###

Target[172.30.49.129_1]: 1:public at 172.30.49.129:
SetEnv[172.30.49.129_1]: MRTG_INT_IP="172.30.49.129"
MRTG_INT_DESCR="FastEthernet0/0"
MaxBytes[172.30.49.129_1]: 12500000
Title[172.30.49.129_1]: Traffic Analysis for 1 --
NEC_Chennai.yourdomain.com
PageTop[172.30.49.129_1]: <h1>Traffic Analysis for 1 --
NEC_Chennai.yourdomain.com</h1>
		<div id="sysdetails">
			<table>
				<tr>
					<td>System:</td>
					<td>NEC_Chennai.yourdomain.com
in </td>
				</tr>
				<tr>
					<td>Maintainer:</td>
					<td></td>
				</tr>
				<tr>
					<td>Description:</td>
					<td>FastEthernet0/0  </td>
				</tr>
				<tr>
					<td>ifType:</td>
					<td>ethernetCsmacd (6)</td>
				</tr>
				<tr>
					<td>ifName:</td>
					<td>Fa0/0</td>
				</tr>
				<tr>
					<td>Max Speed:</td>
					<td>12.5 MBytes/s</td>
				</tr>
				<tr>
					<td>Ip:</td>
					<td>172.30.49.129 ()</td>
				</tr>
			</table>
		</div>


### Interface 2 >> Descr: 'FastEthernet0/1' | Name: 'Fa0/1' | Ip: '' |
Eth: '00-1b-53-ae-12-39' ###
### The following interface is commented out because:
### * it is administratively DOWN
### * it is operationally DOWN
# 
# Target[172.30.49.129_2]: 2:public at 172.30.49.129:
# SetEnv[172.30.49.129_2]: MRTG_INT_IP=""
MRTG_INT_DESCR="FastEthernet0/1"
# MaxBytes[172.30.49.129_2]: 12500000
# Title[172.30.49.129_2]: Traffic Analysis for 2 --
NEC_Chennai.yourdomain.com
# PageTop[172.30.49.129_2]: <h1>Traffic Analysis for 2 --
NEC_Chennai.yourdomain.com</h1>
# 		<div id="sysdetails">
# 			<table>
# 				<tr>
# 					<td>System:</td>
# 					<td>NEC_Chennai.yourdomain.com
in </td>
# 				</tr>
# 				<tr>
# 					<td>Maintainer:</td>
# 					<td></td>
# 				</tr>
# 				<tr>
# 					<td>Description:</td>
# 					<td>FastEthernet0/1  </td>
# 				</tr>
# 				<tr>
# 					<td>ifType:</td>
# 					<td>ethernetCsmacd (6)</td>
# 				</tr>
# 				<tr>
# 					<td>ifName:</td>
# 					<td>Fa0/1</td>
# 				</tr>
# 				<tr>
# 					<td>Max Speed:</td>
# 					<td>12.5 MBytes/s</td>
# 				</tr>
# 			</table>
# 		</div>


### Interface 3 >> Descr: 'Serial0/1/0' | Name: 'Se0/1/0' | Ip:
'172.30.48.134' | Eth: '' ###

Target[172.30.49.129_3]: 3:public at 172.30.49.129:
SetEnv[172.30.49.129_3]: MRTG_INT_IP="172.30.48.134"
MRTG_INT_DESCR="Serial0/1/0"
MaxBytes[172.30.49.129_3]: 193000
Title[172.30.49.129_3]: Traffic Analysis for 3 --
NEC_Chennai.yourdomain.com
PageTop[172.30.49.129_3]: <h1>Traffic Analysis for 3 --
NEC_Chennai.yourdomain.com</h1>
		<div id="sysdetails">
			<table>
				<tr>
					<td>System:</td>
					<td>NEC_Chennai.yourdomain.com
in </td>
				</tr>
				<tr>
					<td>Maintainer:</td>
					<td></td>
				</tr>
				<tr>
					<td>Description:</td>
					<td>Serial0/1/0  </td>
				</tr>
				<tr>
					<td>ifType:</td>
					<td>propPointToPointSerial
(22)</td>
				</tr>
				<tr>
					<td>ifName:</td>
					<td>Se0/1/0</td>
				</tr>
				<tr>
					<td>Max Speed:</td>
					<td>193.0 kBytes/s</td>
				</tr>
				<tr>
					<td>Ip:</td>
					<td>172.30.48.134 ()</td>
				</tr>
			</table>
		</div>


### Interface 4 >> Descr: 'Serial0/1/1' | Name: 'Se0/1/1' | Ip: '' |
Eth: '' ###
### The following interface is commented out because:
### * it is administratively DOWN
### * it is operationally DOWN
# 
# Target[172.30.49.129_4]: 4:public at 172.30.49.129:
# SetEnv[172.30.49.129_4]: MRTG_INT_IP="" MRTG_INT_DESCR="Serial0/1/1"
# MaxBytes[172.30.49.129_4]: 193000
# Title[172.30.49.129_4]: Traffic Analysis for 4 --
NEC_Chennai.yourdomain.com
# PageTop[172.30.49.129_4]: <h1>Traffic Analysis for 4 --
NEC_Chennai.yourdomain.com</h1>
# 		<div id="sysdetails">
# 			<table>
# 				<tr>
# 					<td>System:</td>
# 					<td>NEC_Chennai.yourdomain.com
in </td>
# 				</tr>
# 				<tr>
# 					<td>Maintainer:</td>
# 					<td></td>
# 				</tr>
# 				<tr>
# 					<td>Description:</td>
# 					<td>Serial0/1/1  </td>
# 				</tr>
# 				<tr>
# 					<td>ifType:</td>
# 					<td>propPointToPointSerial
(22)</td>
# 				</tr>
# 				<tr>
# 					<td>ifName:</td>
# 					<td>Se0/1/1</td>
# 				</tr>
# 				<tr>
# 					<td>Max Speed:</td>
# 					<td>193.0 kBytes/s</td>
# 				</tr>
# 			</table>
# 		</div>


### Interface 5 >> Descr: 'Null0' | Name: 'Nu0' | Ip: '' | Eth: '' ###
### The following interface is commented out because:
### * it is a cisco Null0 interface
# 
# Target[172.30.49.129_5]: 5:public at 172.30.49.129:
# SetEnv[172.30.49.129_5]: MRTG_INT_IP="" MRTG_INT_DESCR="Null0"
# MaxBytes[172.30.49.129_5]: 536870911
# Title[172.30.49.129_5]: Traffic Analysis for 5 --
NEC_Chennai.yourdomain.com
# PageTop[172.30.49.129_5]: <h1>Traffic Analysis for 5 --
NEC_Chennai.yourdomain.com</h1>
# 		<div id="sysdetails">
# 			<table>
# 				<tr>
# 					<td>System:</td>
# 					<td>NEC_Chennai.yourdomain.com
in </td>
# 				</tr>
# 				<tr>
# 					<td>Maintainer:</td>
# 					<td></td>
# 				</tr>
# 				<tr>
# 					<td>Description:</td>
# 					<td>Null0  </td>
# 				</tr>
# 				<tr>
# 					<td>ifType:</td>
# 					<td>Other (1)</td>
# 				</tr>
# 				<tr>
# 					<td>ifName:</td>
# 					<td>Nu0</td>
# 				</tr>
# 				<tr>
# 					<td>Max Speed:</td>
# 					<td>536.9 MBytes/s</td>
# 				</tr>
# 			</table>
# 		</div>


WorkDir: c:\PROGRA~1\APACHE~1\Apache2.2\htdocs

RunAsDaemon: yes

Thanks & Regards
N. Sivakumar

-----Original Message-----
From: Jay Hennigan [mailto:jay at west.net] 
Sent: Thursday, February 04, 2010 11:42 AM
To: Sivakumar Natarajan
Cc: mrtg at lists.oetiker.ch
Subject: Re: [mrtg] mrtg graph help

Sivakumar Natarajan wrote:
> Hi,
> 
>  
> 
> My mrtg graph displaying from right to left, How do I change it left
to 
> right,

Use the "growright" option in the target definition.


--
Jay Hennigan - CCIE #7880 - Network Engineering - jay at impulse.net
Impulse Internet Service  -  http://www.impulse.net/
Your local telephone and internet company - 805 884-6323 - WB6RDV



More information about the mrtg mailing list