[mrtg] Problem with Bandwidth on nexus 5010 switch

[Mersberger, Robert]

 Turned out to require a little of both to fix the issue also have to update to OS on the nexus 5010.

Thanks for getting back.


-----Original Message-----
From: Steve Shipway [mailto:s.shipway at auckland.ac.nz]
Sent: Wednesday, January 06, 2010 3:44 PM
To: Mersberger, Robert; mrtg at lists.oetiker.ch
Subject: RE: Problem with Bandwidth on nexus 5010 switch

>
> The configuration below is from chgmaker run against a Nexus 5010
> switch where all interfaces should be 10Gb
>
...
>
> Target[nexus1bottom_Ethernet1_1]:
> #Ethernet1/1:da1sy at nexus1bottom:::::1

If you have 10Gbps interfaces then you should use SNMPv2; this is using SNMPv1.  Add the option --snmp-options=:::::2 as your first option to cfgmaker, and make sure SNMPv2 is enabled on the device.

Another possibility is that the device is reporting an incorrect speed for the interfaces in which case you'll need to fix it manually in the config files.

Steve

Please consider the environment before printing this e-mail.

CONFIDENTIAL NOTICE:
This e-mail message and any attachment(s)  (collectively,
 this 'Email') are intended only for the confidential use of
the recipient(s) named above. If the reader of this message
is not the intended recipient named above or an agent
responsible for delivering it to the intended recipient
named above, you have received this Email in error.
Please notify the sender immediately and permanently delete
this Email and any copies thereof.