[mrtg] graph over 120MB

Stan Barber sob at academ.com
Mon Jul 19 04:54:43 CEST 2010


I wrote a blog entry on this. See http://www.stanbarber.com/network-management/mrtg-2-16-and-high-speed-interfaces. Hope it is helpful.

On Jul 17, 2010, at 10:13 AM, Fetcie, Steven wrote:

> I'm having a similar issue.  Trying to graph 10Gig and GigE
> links.  Getting some nice graphs and all, but they never go
> over 120M even though the one link in question was maxing out 
> at 1 Gig when looking at the manufacturers management software.
> 
> Used the following:
> 
> cfgmaker --global 'WorkDir: /var/www/mrtg' --output /etc/mrtg/mrtg.cfg public at localhost
> 
> Steve Fetcie
> SUNY Canton
> Canton, NY
> 
> -----Original Message-----
> From: mrtg-bounces+fetcie=canton.edu at lists.oetiker.ch [mailto:mrtg-bounces+fetcie=canton.edu at lists.oetiker.ch] On Behalf Of Tobias Oetiker
> Sent: Saturday, July 17, 2010 1:28 AM
> To: Roger Ham
> Cc: mrtg at lists.oetiker.ch
> Subject: Re: [mrtg] graph over 120MB
> 
> Hi Roger,
> 
> note that the options act only when called BEFORE the target ...
> put the comunity at ip bit last
> 
> tobi
> 
> Yesterday Roger Ham wrote:
> 
>> Hello all
>> 
>> I need to do a grahp to a cmts over 120MB on the Wan interface, but the mrtg
>> no do it, my cfgmaker:
>> 
>> cfgmaker 3CKs92 at 12.14.8.234 --global Workdir:/var/www/html/cmts/ --output
>> cmts.cfg --snmp-options=:::::2
>> 
>> thanks and sorry for my bad English
>> 
>> 
>> 
> 
> -- 
> Tobi Oetiker, OETIKER+PARTNER AG, Aarweg 15 CH-4600 Olten, Switzerland
> http://it.oetiker.ch tobi at oetiker.ch ++41 62 775 9902 / sb: -9900
> 
> _______________________________________________
> mrtg mailing list
> mrtg at lists.oetiker.ch
> https://lists.oetiker.ch/cgi-bin/listinfo/mrtg
> 
> _______________________________________________
> mrtg mailing list
> mrtg at lists.oetiker.ch
> https://lists.oetiker.ch/cgi-bin/listinfo/mrtg

Stan Barber






More information about the mrtg mailing list