[mrtg] graph over 120MB

Steve Shipway s.shipway at auckland.ac.nz
Mon Jul 19 23:08:32 CEST 2010

You should probably put the community/host LAST in the cfgmaker or you wont have the effect of the other options:

cfgmaker --snmp-options=:::::2 --global Workdir:/var/www/html/cmts/ --output cmts.cfg 3CKs92 at

because the options only affect the items following them.

Also, 125000000 BYTES is the same as 1 Gbits, so the MaxBytes line is correct for a 1Gbps Ethernet port.


From: mrtg-bounces+s.shipway=auckland.ac.nz at lists.oetiker.ch [mailto:mrtg-bounces+s.shipway=auckland.ac.nz at lists.oetiker.ch] On Behalf Of Roger Ham
Sent: Tuesday, 20 July 2010 2:27 a.m.
To: Tobias Oetiker
Cc: mrtg at lists.oetiker.ch
Subject: Re: [mrtg] graph over 120MB

hello, I did it:

cfgmaker --snmp-options=:::::2 3CKs92 at<mailto:3CKs92 at> --global Workdir:/var/www/html/cmts/ --output cmts.cfg

but the section of the interface of CMTS Gi, still ot yet to 125MB

MaxBytes[]: 125000000

and I need this to 1GB:

MaxBytes[]: 1250000000

I hope your coments... thanks and sorry again for my English

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.oetiker.ch/pipermail/mrtg/attachments/20100719/41101676/attachment.htm 

More information about the mrtg mailing list