[mrtg] Sonicwall 4060 with vlans

[Matthew Ayres]

Dan, 
            Thanks for the info the ifType is not defined looks like I will be talking to sonic wall 
 
 
Matthew Ayres
ProObject Systems Administrator
PH 410-993-1699 Fax 410-993-1691
mgayres at proobject.com



From: mrtg-bounces+mgayres=proobject.com at lists.oetiker.ch [mailto:mrtg-bounces+mgayres=proobject.com at lists.oetiker.ch] On Behalf Of McDonald, Dan
Sent: Monday, September 13, 2010 3:07 PM
To: mrtg
Subject: Re: [mrtg] Sonicwall 4060 with vlans
 
On 9/13/10 9:55 AM, "Matthew Ayres" <mgayres at proobject.com> wrote:

> I have a Sonicwall 4060 with vlans configured on two of its interfaces
> cfgmaker picks up the interface as whole but does not pick up the sub
> interfaces

Are the sub-interfaces in the snmp table?  If you walk the ifTable, do the
sub-interfaces have entries?  If not, then open a product request with
Sonicwall to add that information.

If so, have a look at ifType.  If the type code is not defined in cfgmaker,
it might ignore it.  Cfgmaker around line 456 is where the logic begins for
determining if it is worth monitoring a particular ifType....



> if you could point me in the right direction that would be great
>

--
Daniel J McDonald, CCIE # 2495, CISSP # 78281
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.oetiker.ch/pipermail/mrtg/attachments/20100913/f0c3ff4d/attachment.htm