[mrtg] customize OID problem

Lyle Giese lyle at lcrcomputer.net
Thu Sep 16 16:11:16 CEST 2010


I think you need to re-state your issue. 'not working well' is not
something we can make intelligent suggestions to fix.

Lyle Giese
LCR Computer Services, Inc.

xia binhui wrote:
> is there any one can help me  ?
>  
> thanks
>  
>
>
>  
> 2010/9/10 xia binhui <cz.binhui at gmail.com <mailto:cz.binhui at gmail.com>>
>
>     thanks to Steve Shipway .
>      
>     On your MRTG server, you say you can use a mibbrowse utility?   
>     ----------   yes , there is response from 10.2.0.100 .
>      
>     but i found that the OID is not correct , because after i analyzed
>     the packet between MRTG server and 10.2.0.100 server ,  the value
>     about this OID is NULL .
>      
>     after i changed the OID ,  the value is not NULL from "captured
>     packet "  , it is correct  , but MRTG is also not working well .
>      
>      
>     new cfgfile is below :
>      
>     -----------------------------------------------------------------------
>     RunAsDaemon: yes
>     Interval: 5
>     WorkDir: C:\inetpub\wwwroot\PDSN
>     Options[_]: growright, bits, nopercent
>     # Para calculo, cada 64Kbps = 8000
>     EnableIPv6: no
>
>     #  to get bits instead of bytes and graphs growing to the right
>     Options[_]: growright, nopercent, gauge, unknaszero
>     EnableIPv6: no
>
>     LoadMibs: c:\mrtg\ZTE-CN-PDSN-PMIRP-MIB
>     WorkDir: c:\Inetpub\wwwroot\PDSN
>     ######################################################################
>     # System:
>     # Description:
>     # Contact:
>     # Location:
>     ######################################################################
>
>     Target[10.2.0.100]:
>     1.3.6.1.4.1.3902.7.222.3.5.1.3.1&1.3.6.1.4.1.3902.7.222.3.5.1.3.1:public at 10.2.0.100:::::2
>     LegendI[10.2.0.100]: Total de usuários
>     LegendO[10.2.0.100]: Usuários activos
>     Legend1[10.2.0.100]: Total usuários PDSN16K
>     Legend2[10.2.0.100]: Usuários activos PDSN16K
>     ShortLegend[10.2.0.100]:users
>     YLegend[10.2.0.100]:users
>     MaxBytes[10.2.0.100]: 15000
>     Title[10.2.0.100]: ZTE PDSN
>      
>     -------------------------------------------------------------------------------
>      
>     the information is that after i run mrtg cfgfile  :
>      
>      
>     C:\mrtg\bin>perl mrtg PDSN.cfg
>
>     Daemonizing MRTG ...
>     Do Not close this window. Or MRTG will die
>     SNMP Error:
>     Received SNMP response with error code
>       error status: 19
>       index 3 (OID: 1.3.6.1.2.1.1.3.0)
>
>     SNMPv2c_Session (remote host: "10.2.0.100" [10.2.0.100].161)
>                        community: "public"
>                       request ID: 2143957165
>
>                      PDU bufsize: 8000 bytes
>                          timeout: 2s
>                          retries: 5
>                          backoff: 1)
>      at C:/mrtg/bin\..\lib\mrtg2/SNMP_util.pm line 492
>     SNMPGET Problem for 1.3.6.1.4.1.3902.7.222.3.5.1.3.1
>     1.3.6.1.4.1.3902.7.222.3.5.
>     1.3.1 sysUptime sysName on public at 10.2.0.100:::::2:v4only
>     <mailto:public at 10.2.0.100:::::2:v4only>
>      at mrtg line 2202
>     2010-09-10 08:42:00: ERROR: Target[10.2.0.100][_IN_] '
>     $target->[0]{$mode} ' did
>
>      not eval into defined data
>     2010-09-10 08:42:00: ERROR: Target[10.2.0.100][_OUT_] '
>     $target->[0]{$mode} ' di
>
>     d not eval into defined data
>     2010-09-10 08:42:00, Rateup WARNING: C:/mrtg/bin\rateup Can't
>     remove 10.2.0.100.
>     old updating log file
>
>     SNMP Error:
>     Received SNMP response with error code
>       error status: 19
>       index 3 (OID: 1.3.6.1.2.1.1.3.0)
>
>     SNMPv2c_Session (remote host: "10.2.0.100" [10.2.0.100].161)
>                        community: "public"
>                       request ID: 2143957166
>
>                      PDU bufsize: 8000 bytes
>                          timeout: 2s
>                          retries: 5
>                          backoff: 1)
>      at C:/mrtg/bin\..\lib\mrtg2/SNMP_util.pm line 492
>     SNMPGET Problem for 1.3.6.1.4.1.3902.7.222.3.5.1.3.1
>     1.3.6.1.4.1.3902.7.222.3.5.
>     1.3.1 sysUptime sysName on public at 10.2.0.100:::::2:v4only
>     <mailto:public at 10.2.0.100:::::2:v4only>
>      at mrtg line 2202
>     2010-09-10 08:47:00: ERROR: Target[10.2.0.100][_IN_] '
>     $target->[0]{$mode} ' did
>
>      not eval into defined data
>     2010-09-10 08:47:00: ERROR: Target[10.2.0.100][_OUT_] '
>     $target->[0]{$mode} ' di
>
>     d not eval into defined data
>
>     thanks for your attention .
>      
>      
>      
>      
>
>
>      
>     2010/9/9 Steve Shipway <s.shipway at auckland.ac.nz
>     <mailto:s.shipway at auckland.ac.nz>>
>
>         MRTG (and cfgmaker) are unable to use SNMP to query this OID.
>
>          
>
>         Either your community string is wrong, or you have a firewall
>         or ACL blocking you from talking to this server, or the OID is
>         wrong.
>
>          
>
>         On your MRTG server, you say you can use a mibbrowse utility? 
>         Try to use something simple like snmpwalk to verify you can
>         talk to the server.  If you can, then check that this is
>         EXACTLY the correct OID -- sometimes there is a trailing .0
>         suffix that is not displayed.
>
>          
>
>         You are using SNMPv2 -- check this is supported, maybe the
>         device only has this OID in SNMPv1?  Maybe you are testing
>         with SNMPv1 but MRTG is using SNMPv2c?
>
>          
>
>         Steve
>
>          
>
>         ------------------------------------------------------------------------
>
>         *Steve Shipway*
>
>         ITS Unix Services Design Lead
>
>         University of Auckland
>
>         Floor 2, 58 Symonds Street
>
>         /09 3737599 ext 86487/
>
>         P Please consider the environment before printing this e-mail
>
>         / /
>
>          
>
>         *From:* mrtg-bounces+s.shipway=auckland.ac.nz
>         <http://auckland.ac.nz/>@lists.oetiker.ch
>         <http://lists.oetiker.ch/> [mailto:mrtg-bounces+s.shipway
>         <mailto:mrtg-bounces%2Bs.shipway>=auckland.ac.nz
>         <http://auckland.ac.nz/>@lists.oetiker.ch
>         <http://lists.oetiker.ch/>] *On Behalf Of *xia binhui
>         *Sent:* Thursday, 9 September 2010 9:13 p.m.
>         *To:* mrtg at lists.oetiker.ch <mailto:mrtg at lists.oetiker.ch>
>         *Subject:* [mrtg] customize OID problem
>
>          
>
>          
>
>         Dear all ,
>
>          
>
>         when i tried to use the following cfgfile, but it failed , 
>         can anyone help me ?
>
>          
>
>         < !----------
>
>         RunAsDaemon: yes
>
>         Interval: 5
>
>         WorkDir: C:\inetpub\wwwroot\PDSN
>
>          
>
>         # Options[_]: growright, bits, nopercent
>
>          
>
>         # Para calculo, cada 64Kbps = 8000
>
>          
>
>         EnableIPv6: no
>
>          
>
>          
>
>          
>
>          
>
>          
>
>         #################################### MOVINET
>         ##################################################
>
>          
>
>         ### Usuários Activos ###
>
>          
>
>         Target[Movinet_Users]: 
>         1.3.6.1.4.1.3902.7.222.3.5.1.3&1.3.6.1.4.1.3902.7.222.3.5.1.3:public at 10.2.0.100:::::2
>
>         YLegend[Movinet_Users]: Usuários
>
>         ShortLegend[Movinet_Users]: Usuários
>
>         MaxBytes[Movinet_Users]: 15000          
>
>         Options[Movinet_Users]: nopercent, gauge, unknaszero, growright
>
>         Legend1[Movinet_Users]:  Total de Usuários Conectados
>
>         LegendI[Movinet_Users]: 
>
>         LegendO[Movinet_Users]:  Movinet Total
>
>         Title[Movinet_Users]: Total de Usuários Conectados (TODO PAIS)
>
>         PageTop[Movinet_Users]: <H1>  Total de Usuários Conectados</H1>
>
>         WithPeak[Movinet_Users]: ymw
>
>          
>
>                       !----- >
>
>          
>
>          
>
>              ERROR:
>
>          
>
>         C:\mrtg\bin>perl mrtg mrtg.cfg
>
>         Daemonizing MRTG ...
>
>         Do Not close this window. Or MRTG will die
>
>         SNMP Error:
>
>         Received SNMP response with error code
>
>           error status: genErr
>
>           index 1 (OID: 1.3.6.1.4.1.3902.7.222.3.5.1.3)
>
>         SNMPv2c_Session (remote host: "10.2.0.100" [10.2.0.100].161)
>
>                            community: "public"
>
>                           request ID: 433882435
>
>                          PDU bufsize: 8000 bytes
>
>                              timeout: 2s
>
>                              retries: 5
>
>                              backoff: 1)
>
>          at C:/mrtg/bin\..\lib\mrtg2/SNMP_util.pm line 492
>
>         SNMPGET Problem for 1.3.6.1.4.1.3902.7.222.3.5.1.3
>         1.3.6.1.4.1.3902.7.222.3.5.1.3
>
>         sysUptime sysName on public at 10.2.0.100:::::2:v4only
>         <mailto:public at 10.2.0.100:::::2:v4only>  at mrtg line 2202
>
>         2010-08-30 11:02:40: ERROR: Target[movinet_users][_IN_] '
>         $target->[0]{$mode} '
>
>         did not eval into defined data
>
>         2010-08-30 11:02:40: ERROR: Target[movinet_users][_OUT_] '
>         $target->[0]{$mode} '
>
>          did not eval into defined data
>
>         Terminating on signal SIGINT(2)
>
>
>
> ------------------------------------------------------------------------
>
> _______________________________________________
> mrtg mailing list
> mrtg at lists.oetiker.ch
> https://lists.oetiker.ch/cgi-bin/listinfo/mrtg
>   

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.oetiker.ch/pipermail/mrtg/attachments/20100916/13b09caa/attachment-0001.htm 


More information about the mrtg mailing list