[mrtg] please help

[Volk,Gregory B]

It kind of feels like your interface names (gi1/0/3) may have changed.
I'm not too familiar with the cisco 12000 routers, but is it possible
that the card has been moved to another slot and is now gi2/0/3 or
something like that?
 
Rerun cfgmaker against the device and see if that fixes your issue.
 
You could also execute:
"snmpwalk -v2c -c EeSPnOok c12k-Borde interfaces" and see what that
lists for all the interfaces. In particular, look for valid
interface-mib values for the instance numbers that match gi1/0/3 and
po0/1/2.

 



 
 If you are not the intended recipient of this message (including attachments), or if you have received this message in error, immediately notify us and delete it and any attachments.  If you no longer wish to receive e-mail from Edward Jones, please send this request to messages at edwardjones.com.  You must include the e-mail address that you wish not to receive e-mail communications.  For important additional information related to this e-mail, visit www.edwardjones.com/US_email_disclosure
 
________________________________
 


	From: mrtg-bounces+greg.volk=edwardjones.com at lists.oetiker.ch
[mailto:mrtg-bounces+greg.volk=edwardjones.com at lists.oetiker.ch] On
Behalf Of Ivan Palacios
	Sent: Friday, March 11, 2011 4:33 PM
	To: mrtg at lists.oetiker.ch
	Subject: [mrtg] please help
	
	

	I have problem to monitor STM1

	 

	 

	mrtg.root:/usr/local/mrtg-2/bin/config#
/usr/local/mrtg-2/bin/mrtg /usr/local/mrtg-2/bin/config/c12k-Borde.cfg

	2011-03-11 16:25:17: WARNING: Can not determine ifNumber for
EeSPnOok at c12k-Borde:::::2  ref: 'Name'     key: 'Gi1/0/3'

	2011-03-11 16:25:17: WARNING: Can not determine ifNumber for
EeSPnOok at c12k-Borde:::::2  ref: 'Name'     key: 'PO0/1/2'

	2011-03-11 16:25:22: ERROR: Target[c12k-borde_gi1_0_3][_IN_] '
$target->[3]{$mode} ' did not eval into defined data

	2011-03-11 16:25:22: ERROR: Target[c12k-borde_gi1_0_3][_OUT_] '
$target->[3]{$mode} ' did not eval into defined data

	2011-03-11 16:25:22: ERROR: Target[c12k-borde_po0_1_2][_IN_] '
$target->[5]{$mode} ' did not eval into defined data

	2011-03-11 16:25:22: ERROR: Target[c12k-borde_po0_1_2][_OUT_] '
$target->[5]{$mode} ' did not eval into defined data

	 

	 

	Target[c12k-Borde_Gi1_0_3]: #Gi1/0/3:EeSPnOok at c12k-Borde:::::2

	SetEnv[c12k-Borde_Gi1_0_3]: MRTG_INT_IP="190.212.134.10"
MRTG_INT_DESCR="GigabitEthernet1/0/3"

	Directory[c12k-Borde_Gi1_0_3]: c12k-Borde

	MaxBytes[c12k-Borde_Gi1_0_3]: 125000000

	Title[c12k-Borde_Gi1_0_3]: GigabitEthernet1/0/3 ENITEL - BackUp
IP 155Mbps  -- C12K-Borde

	PageTop[c12k-Borde_Gi1_0_3]: <h1>GigabitEthernet1/0/3 155Mbps
-- </h1>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.oetiker.ch/pipermail/mrtg/attachments/20110311/63fb9c62/attachment-0001.htm