[mrtg] MIB for Dell PowerConnect 3524?

[Steve Shipway]

You might like to go to http://www.steveshipway.org/cfgmaker and look in there.  There are a few host templates for various UPSs and for a generic device.

Try using cfgmaker with one or all of these host templates and see if any work - if you device supports the standard UPS MIB objects then there is a good chance one of the host templates will give you what you want.

Steve

Steve Shipway
University of Auckland ITS
UNIX Systems Design Lead
s.shipway at auckland.ac.nz
Ph: +64 9 373 7599 ext 86487


________________________________________
From: mrtg-bounces+s.shipway=auckland.ac.nz at lists.oetiker.ch [mrtg-bounces+s.shipway=auckland.ac.nz at lists.oetiker.ch] on behalf of Steve Lindemann [steve at marmot.org]
Sent: Saturday, 22 February 2014 10:19 a.m.
To: mrtg at lists.oetiker.ch
Subject: [mrtg] MIB for Dell PowerConnect 3524?

Does anyone know where I can get the MIB for a Dell PowerConnect 3524 to
use with MRTG?  I've been looking and haven't had any luck finding what
I need.

In lieu of that, I'll take suggestions for monitoring thru put on the
ports on that model switch.

Thanks all!
--
Steve Lindemann, MSIS                   __
Network Administrator                  //\\  ASCII Ribbon Campaign
Marmot Library Network                 \\//  against HTML/RTF email,
+1.970.242.3331 x116                   //\\  vCards & M$ attachments
http://www.marmot.org

_______________________________________________
mrtg mailing list
mrtg at lists.oetiker.ch
https://lists.oetiker.ch/cgi-bin/listinfo/mrtg