[mrtg] MTRG IN AND OUT TRAFFIC DON'T MATCH

[McDonald, Daniel (Dan)]

The issue is the roll-over problem.  With so many things being added, there is no reliable way to determine when the individual interface counters have rolled over.  The solution is to use RRD as the backend, routers2 as the front end, and create stacked graphs from the individual components.


From: mrtg <mrtg-bounces+dan.mcdonald=austinenergy.com at lists.oetiker.ch> on behalf of Rwakagabo Janvier <janvier.r at ricta.org.rw>
Date: Tuesday, May 8, 2018 at 02:55
To: Rwakagabo Janvier <janvier.r at ricta.org.rw>
Cc: "mrtg at lists.oetiker.ch" <mrtg at lists.oetiker.ch>
Subject: Re: [mrtg] MTRG IN AND OUT TRAFFIC DON'T MATCH

Hello

Any comment on this issue??

Regards,

Janvier R.


On 7 May 2018, at 14:59, Rwakagabo Janvier <janvier.r at ricta.org.rw<mailto:janvier.r at ricta.org.rw>> wrote:

Hello

Can you assist on finding why MRTG aggregate graph is is not matching for inbound and outbound traffic graphs, check below the aggregate configuration in mrtg.cfg, and the graph that shows the mismatch.

<PastedGraphic-1.tiff>

Target[Aggregate_Traffic]: #xe-0/0/1:switch at x.x.x.x<mailto:switch at x.x.x.x>:::::2 + #xe-0/0/3:switch at x.x.x.x<mailto:switch at x.x.x.x>:::::2 + #xe-0/0/4:switch at x.x.x.x<mailto:switch at x.x.x.x>:::::2 + #xe-0/0/5:switch at x.x.x.x<mailto:switch at x.x.x.x>:::::2 + #xe-0/0/7:switch at x.x.x.x<mailto:switch at x.x.x.x>:::::2 + #xe-0/0/8:switch at x.x.x.x<mailto:switch at x.x.x.x>:::::2 + #xe-0/0/9:switch at x.x.x.x<mailto:switch at x.x.x.x>:::::2 + #xe-0/0/10:switch at x.x.x.x<mailto:switch at x.x.x.x>:::::2 + #xe-0/0/11:switch at x.x.x.x<mailto:switch at x.x.x.x>:::::2 + #xe-0/0/12:switch at x.x.x.x<mailto:switch at x.x.x.x>:::::2 + #xe-0/0/13:switch at x.x.x.x<mailto:switch at x.x.x.x>:::::2 + #xe-0/0/14:switch at x.x.x.x<mailto:switch at x.x.x.x>:::::2 + #xe-0/0/15:switch at x.x.x.x<mailto:switch at x.x.x.x>:::::2 + #xe-0/0/16:switch at x.x.x.x<mailto:switch at x.x.x.x>:::::2 + #xe-0/0/17:switch at x.x.x.x<mailto:switch at x.x.x.x>:::::2  + #xe-0/0/18:switch at x.x.x.x<mailto:switch at x.x.x.x>:::::2 + #xe-0/0/19:switch at x.x.x.x<mailto:switch at x.x.x.x>:::::2 + #xe-0/0/30:switch at x.x.x.x<mailto:switch at x.x.x.x>:::::2 + #ge-0/1/0:switch at x.x.x.x<mailto:switch at x.x.x.x>:::::2 + #ge-0/1/1:switch at x.x.x.x<mailto:switch at x.x.x.x>:::::2 + #ge-0/1/2:switch at x.x.x.x<mailto:switch at x.x.x.x>:::::2 + #xe-0/0/27:switch at x.x.x.x<mailto:switch at x.x.x.x>:::::2 + #xe-0/1/5:switch at x.x.x.x<mailto:switch at x.x.x.x>:::::2 + #ge-0/1/7:switch at x.x.x.x<mailto:switch at x.x.x.x>:::::2 + #xe-0/0/21:switch at x.x.x.x<mailto:switch at x.x.x.x>:::::2 + #xe-0/0/22:switch at x.x.x.x<mailto:switch at x.x.x.x>:::::2 + #xe-0/0/25:switch at x.x.x.x<mailto:switch at x.x.x.x>:::::2 + #xe-0/0/30:switch at x.x.x.x<mailto:switch at x.x.x.x>:::::2 + #ge-0/1/3:switch at x.x.x.x<mailto:switch at x.x.x.x>:::::2 + #xe-0/2/0:switch at x.x.x.x<mailto:switch at x.x.x.x>:::::2 + #xe-0/0/29:switch at x.x.x.x<mailto:switch at x.x.x.x>:::::2
MaxBytes[Aggregate_Traffic]: 1250000000

Title[Aggregate_Traffic]: Aggregate Traffic Analysis
PageTop[Aggregate_Traffic]: <H1>Aggregate Traffic Analysis</H1>
#Target[Aggregate_Traffic]: 1:switch at x.x.x.x<mailto:switch at x.x.x.x>: + 2:switch at x.x.x.x<mailto:switch at x.x.x.x>: + 3:switch at x.x.x.x<mailto:switch at x.x.x.x>: + 4:switch at x.x.x.x<mailto:switch at x.x.x.x>: + 5:switch at x.x.x.x<mailto:switch at x.x.x.x>: + 6:switch at x.x.x.x<mailto:switch at x.x.x.x>: + 7:switch at x.x.x.x<mailto:switch at x.x.x.x>: + 8:switch at x.x.x.x<mailto:switch at x.x.x.x>: + 9:switch at x.x.x.x<mailto:switch at x.x.x.x>: + 10:switch at x.x.x.x<mailto:switch at x.x.x.x>: + 11:switch at x.x.x.x<mailto:switch at x.x.x.x>: + 12:switch at x.x.x.x<mailto:switch at x.x.x.x>: + 13:switch at x.x.x.x<mailto:switch at x.x.x.x>: + 14:switch at x.x.x.x<mailto:switch at x.x.x.x>: + 15:switch at x.x.x.x<mailto:switch at x.x.x.x>: + 16:switch at x.x.x.x<mailto:switch at x.x.x.x>: + 17:switch at x.x.x.x<mailto:switch at x.x.x.x>: + 18:switch at x.x.x.x<mailto:switch at x.x.x.x>: + 19:switch at x.x.x.x<mailto:switch at x.x.x.x>: + 20:switch at x.x.x.x<mailto:switch at x.x.x.x>: + 21:switch at x.x.x.x<mailto:switch at x.x.x.x>: + 22:switch at x.x.x.x<mailto:switch at x.x.x.x>: + 23:switch at x.x.x.x<mailto:switch at x.x.x.x>: + 24:switch at x.x.x.x<mailto:switch at x.x.x.x>: + 25:switch at x.x.x.x<mailto:switch at x.x.x.x>: + 26:switch at x.x.x.x<mailto:switch at x.x.x.x>: + 27:switch at x.x.x.x<mailto:switch at x.x.x.x>: + 28:switch at x.x.x.x<mailto:switch at x.x.x.x>: + 29:switch at x.x.x.x<mailto:switch at x.x.x.x>: + 30:switch at x.x.x.x<mailto:switch at x.x.x.x>: + 31:switch at x.x.x.x<mailto:switch at x.x.x.x>:

x.x.x.x stands for IP of he switch

Regards,

Janvier R.


-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.oetiker.ch/pipermail/mrtg/attachments/20180521/2d4665c6/attachment.html>