<!doctype html public "-//w3c//dtd html 4.0 transitional//en">
<html>
Thanks David & Presciliano dos Santos
<p>but now i am facing following error
<p><b>SNMP Error:</b>
<br><b>Received SNMP response with error code</b>
<br><b> error status: genErr</b>
<br><b> index 1 (OID: 1.3.6.1.4.1.5.1.1.54.2.1.14)</b>
<br><b>SNMPv1_Session (remote host: "202.163.100.2" [202.163.100.2].161</b>
<br><b>
community: "netman"</b>
<br><b>
request ID: 1533549930</b>
<br><b>
PDU bufsize: 8000 bytes</b>
<br><b>
timeout: 2s</b>
<br><b>
retries: 5</b>
<br><b>
backoff: 1)</b>
<p>What does it means
<br>Any help is appreciable
<p>Regards,
<br>Asif
<br>David C Prall wrote:
<blockquote TYPE=CITE>> I am new in MRTG can any one pls tell me meaning
of following error
<br>when
<br>> i tried to gather current modem conection of my tigris (acc) chasis.
<br>>
<br>> ERROR: If specifying the full OID, you must specify
<br>> 2 full OID's separated by '&'. Error found with
<br>> "1.3.6.1.4.1.5.1.1.54.2.1.14:netman@202.163.100.2" in
<br>"Target[sessions]"
<br>>
<br>>
<br>>
<br>> ABORT: Please fix the error(s) in your config file
<br>>
<br>> There support people send me above oid .
<br>>
<br>> Any help is appreciable.
<br>>
<br>> Reagrds,
<br>> Asif
<br>>
<br>>
<br>You need to do specifically what it states, per the config.html you
need
<br>to OIDS. One for the In data and one for Out data. You could use the
<br>same one for both if you wished. They will need an & between the
two of
<br>them.
<p>Target[sessions]:
<br>1.3.6.1.4.1.5.1.1.54.2.1.14&1.3.6.1.4.1.5.1.1.54.2.1.14:netman@202.163.1
<br>00.2
<p>David C Prall, MCNE MCSE
DCP Technologies
<br>dcp@dcptech.com
<a href="http://www.dcptech.com">http://www.dcptech.com</a>
<br>dcppage@dcptech.com
<p>--
<br>* To unsubscribe from the mrtg mailing list, send a message with the
<br> subject: unsubscribe to mrtg-request@list.ee.ethz.ch
<br>* The mailing list archive is at <a href="http://www.ee.ethz.ch/~slist/mrtg">http://www.ee.ethz.ch/~slist/mrtg</a></blockquote>
</html>