I went to my port on the switch 5/33, and found it to have an interface index of
88.

So I used 88:  (I saw that the MRTG.CFG can use external MIB files, do I need to
include one?)

--------------------------MRTG GFC file
------------------------------------------
Target[158.68.91.129.88]: 88:public@158.68.91.129
MaxBytes[158.68.91.129.88]: 1250000
Title[158.68.91.129.88]: Port 5/33 (Nick)
PageTop[158.68.91.129.88]: <H1>Traffic Analysis for Port 5/33 (Nick)
 </H1>
 <TABLE>
   <TR><TD>System:</TD><TD>Cisco 6509 Switch on 5th Floor, Main CPU Room</TD></T
R>
   <TR><TD>Maintainer:</TD><TD>Richard Weigel (503)952-6486</TD></TR>
   <TR><TD>Interface:</TD><TD>Port 5/33 (Nick) (1)</TD></TR>
   <TR><TD>IP:</TD><TD>No hostname defined for IP address (158.68.205.254)</TD><
/TR>
   <TR><TD>Max Speed:</TD>
       <TD>1250.0 kBytes/s (ethernetCsmacd)</TD></TR>
  </TABLE>

-------------------------------- Output -------------------------

SNMP Error:
Received SNMP response with error code
  error status: noSuchName
  index 1 (OID: 1.3.6.1.2.1.2.2.1.10.88)
SNMPv1_Session (remote host: "158.68.91.129" [158.68.91.129].161
                  community: "public"
                 request ID: 479997879
                PDU bufsize: 8000 bytes
                    timeout: 2s
                    retries: 5
                    backoff: 1)
SNMPGET Problem for ifInOctets.88 ifOutOctets.88 sysUptime sysName ifDescr.88 on
 public@158.68.91.129
SNMPGET: Failed to reach target: "88:public@158.68.91.129". I tried multiple tim
es! public@158.68.91.129







"Hahn, Michael {GY-O~Mannheim}" <MICHAEL.HAHN@roche.com> on 07/13/2000 11:17:32
PM
                                                                                
                                                                                
                                                                                


                                                              
                                                              
                                                              
 To:      Nick Ellson/ORSO/OR/BLM/DOI@BLM,                    
          mrtg@list.ee.ethz.ch                                
                                                              
 cc:                                                          
                                                              
                                                              
                                                              
 Subject: [mrtg] AW: Cisco 6500 switch port monitoring?       
                                                              








you do not have to use the oids. you can just use the interface index.

for example switch is "e-switch.x.com". with "sho port 1/1" you find out that
the interface-index of port 1/1 is 3, so the command would be:
target[e-switch]: 3:password@e-switch.x.com
or if to be seen as from the station on the port:
target[e-switch]: -3:password@e-switch.x.com

-----Urspr

-- Binary/unsupported file stripped by Listar --
-- Err : No filename to use for decode, file stripped.
-- Type: text/plain


--
Unsubscribe mailto:mrtg-request@list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi